April 7, 201114 yr How about you address the PMs I sent you 2 weeks ago? I still don't have the correct steering linkage.
April 7, 201114 yr Author How about you address the PMs I sent you 2 weeks ago? I still don't have the correct steering linkage. Give me your new address
April 8, 201114 yr Author You will need longer brake lines and new shocks I can make you the lift for 600 but those are extra things you will need I can pick them up for you but thats a little extra I also just started making new front stabilizer bars Ill post them up soon I broke mine so I have made new double strength ones lol let me know what you want to do I can start making it right away..... Its for a 86 brat
April 15, 201114 yr Hey, I'm making a 4 inch kit and i saw that earlier in the thread you said the strut towers had to be at a 30* angle for an EA82? sounds like alot just wonderin if thats right or if the angle differs in response to the amount of lift? thanks, jack.
April 20, 201114 yr Author 15 degrees on top and on bottom it equals out to 30 degrees it is the perfect setup for 4 inch Hey, I'm making a 4 inch kit and i saw that earlier in the thread you said the strut towers had to be at a 30* angle for an EA82? sounds like alot just wonderin if thats right or if the angle differs in response to the amount of lift? thanks, jack.
April 26, 201114 yr How much for just the front and rear strut drops for an ea82 4" and 6" not sure how big i wanna go yet
April 28, 201114 yr Author A even 200 for the stuff and 25 for shipping either 4 or 6 its fine with me How much for just the front and rear strut drops for an ea82 4" and 6" not sure how big i wanna go yet
April 28, 201114 yr sweet how much would a whole six inch kit be will probably just go with the strut lowering stuff but just curious on the whole kit price will pm you when i can get the funding lol
April 28, 201114 yr Author sweet how much would a whole six inch kit be will probably just go with the strut lowering stuff but just curious on the whole kit price will pm you when i can get the funding lol 500 i think 50 shipped
May 8, 201114 yr How big of tires can I fit with a 4 inch and 6 inch lift with 14 inch wheels? How much to buy the lift nad have you install it if I bring it to you and how long would it take you to install it?
May 8, 201114 yr Author I would only go with 27 inch with the stock motor you can get a 29 under it but with 14 inch rims only one tire is available at 28 inches tall and that is the bfg all terrain anyways um for a 4 inch install will be 450 I do not charge to install but it will take 2 days to install with a 6 inch it will be 600 anything else let me know Mike How big of tires can I fit with a 4 inch and 6 inch lift with 14 inch wheels? How much to buy the lift nad have you install it if I bring it to you and how long would it take you to install it?
June 14, 201114 yr Apparently, Michael is not able to back up the products he sells. The kit I ordered in early March, and received, did not have all the proper pieces it was supposed to have. I have been quite patient, but I am quickly losing patience for not having what I ordered and paid for. I've sent PMs and email in the past, and still don't have everything I ordered. Consider this a bad review from an unhappy customer. I would not order anything from him again. It has been 3 months since I first ordered the kit, and I still am without all the appropriate pieces. Which means I have a kit I can't use, since it requires everything to work. And if I paid for it, I damn sure want it.
June 21, 201114 yr Apparently, Michael is not able to back up the products he sells. The kit I ordered in early March, and received, did not have all the proper pieces it was supposed to have. I have been quite patient, but I am quickly losing patience for not having what I ordered and paid for. I've sent PMs and email in the past, and still don't have everything I ordered. Consider this a bad review from an unhappy customer. I would not order anything from him again. It has been 3 months since I first ordered the kit, and I still am without all the appropriate pieces. Which means I have a kit I can't use, since it requires everything to work. And if I paid for it, I damn sure want it. Man, that's a bad deal...sorry to hear about that...
June 21, 201114 yr I wasnt exactly thrilled about the quality of the kit I got. The welds were barely better than bird-************ welds. I had to reweld the strut blocks I purchased from him. Serious safety issue there. I wasnt going to say anything, but maybe a touch of negative feedback will wake him up a bit to fill his orders and bring the quality control up a bit.
July 15, 201114 yr Hey Michael, I am looking for a 2" lift kit for my 98 legacy outback. Let me know if you can help me with it. Thanks,
July 26, 201114 yr I know I'm saving up for a 2" lift on my brat. Any idea how big a tire will fit on a 2"? (going to go to Toyota 15" rims)
July 26, 201114 yr I know I'm saving up for a 2" lift on my brat. Any idea how big a tire will fit on a 2"? (going to go to Toyota 15" rims) Depending on if you do much fender trimming, probably 27s or so, mayne 28s.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now