Jump to content
Ultimate Subaru Message Board

Lift kit for 92' Loyale


Ubersuber420
 Share

Recommended Posts

With a 3" you should be able to run 27-28" with no problems, you may still need to trim the front fenders due to turning clearances.. Now keep in mind with any Lift higher then 2" the steering shaft that go's to the steering box will need to be longer, since the 3" and up will require using Crossmember blocks, droping the engine 2" or so inches to keep the stress on the axles closer to stock.

 

Anyhoo, I run SJRs 2" lift with 26" tires (Works great) anything over 28" on the auto trans and it'll start lagging.

 

Best'O luck

-Tom

Edited by TheLoyale
Link to comment
Share on other sites

Hey, I was wondering where i could get a 3'' lift for my loyale. I live in island county in WA, and was hoping for something local. Also, what size of tires could a lift like this clear? Thanks in advance.

 

I have a '92 Loyale with a lift and it is a ton of fun! I would go with a SJR kit that's posted above. Have Fun!

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...