Everything posted by kiwi subbie
-
So Really, how many started a ej swap and never finished it
I started a swap on a old 1991? brumby but never continued on with it. Was going to drop in a EG33. Brumby wasnt a runner. I ended up picking up another project that I really wanted to do more with. So sold the brumby and kept the EG33.
-
W series Toyota trans adaptors
Ive seen a few pics of a AE86 running a EJ
-
A few pics from the day my little yellow 1400 DL was used in filming
Good news Ive been told the date when it will be TV After its aired it will hopefully air on TVNZ on demand website so you guys that arnt in NZ can see it :
-
Adding 2 Cylinders
Most guys ditch the A/C because there is very little room with the EG33 being fitted into the earyer shape legacy/impreza shell. Im guessing there wouldnt be much room aswell in the Forester engine bay?
-
Another Rabbit added to the Stable.. 1965 S102 Victa Rabbit
Heres a quick vid I made.. Lots of lovely 2 stroke smoke goodness
-
The 74 sedan thread.....................
For rare shocks I used A gabrial unit. It came off a suzuki 4wd of some sort. It was the only thing that I found close to fit for a replacement on my 1974 1400DL.
-
Another Rabbit added to the Stable.. 1965 S102 Victa Rabbit
FHI 1965 S102 FUJI RABBIT SCOOTER MODEL: S102 YEAR:1965? ENGINE: 48CC 2 stroke single cylinder GEARBOX: 3 SPEED ELECTRICAL: 12 Volts with electric START ;D A little bit of History.... These where sold here as a Victa Scooter. It was imported into NZ in 1960s by J Cameron Lewis & Co., LTD and made up from CKD units, Reassembled in Chch. They where stored and made up.. Im not sure if this one was imported in 1960 or in a later date? I brought my 1st one a few years ago. This one I got was restored about 12 plus years ago. It still runs and when the weather is good it starts on 1st pop.
-
Anyone ever EA swaped a legacy ?
My legacy is a 1.8L 4WD and it goes pretty good. Not slugish at all And I dont know if you guys know but the Legacy did also come with the EJ16 as well but only come in fwd
-
Alternator Help.. for a 1987 Subaru Domingo van
Im looking at getting a Subaru Domingo Van but the problem is its missing its alternator. I can not seem to find a replacement at any of the wrecking yards. Its fitted with the 1.2L 3 cylinder engine and is 4WD. Ive got a parts book for both a 87,88 Justy and the Domingo Van and they are look totally different. So does any one know is a Justy one would work? Or if there one off a different make and model that would work? Any help would be great. Thanks
-
Gen 1 ej powered wagon build ** W/pics*
Wow good work That makes me wish I brought that 1600 wagon now lol More pics please of the finished result
-
A first post-request 78/9 dl?
And a very rear JDM 1976ish? 4wd sedan. I enquired alot in the past about a 4wd coupe and there has been nothing in the 1400/1600 coupe line. The earlyest one I know of is the 1982-83ish RX coupe. It mite have been fitted with the running gear out 4wd wagon? One guy did that in aussie back in was it 76 or 79?
-
A first post-request 78/9 dl?
As far as I know the coupe didnt come in 4wd and wasnt a DL? I maybe wrong on that? It could be a GL and front wheel drive
-
Best bang for buck Subaru...
A EA71 1600cc wagon... Cheap as chips to run. Reliable.. only prob is rust I found on my old one. My one was a 1982 Leone. Heater worked very well so did all the other electrical equipment
-
A few pics from the day my little yellow 1400 DL was used in filming
I try too. Hopefully they will put it on TVNZ on demand
-
A few pics from the day my little yellow 1400 DL was used in filming
Its called the Missing. Its a tv show done for NZ TV1? I have no clue when its going to be on. Cant say much about it. It Just follows some one that disapears of the face of the earth. True storys. This is a wee bit of info from the 1st series.
-
A few pics from the day my little yellow 1400 DL was used in filming
Heres a few pics from the day my little yellow 1400 DL was used in filming for one epsode in a TV Series
-
Ignition barrel replacements for 1400???
Heres the broken key.
-
Ignition barrel replacements for 1400???
Wow that was easy.. It got replaced in a short time... He had a new one in his van. So It must still be reasonally common Price wasnt to bad. He said about $120 to replace. ( not bad when one place said the call out fee was 140 by it self not including parts ) ( A leone one costs $90 by it self. ) Now I just got to reattach every thing Heres some pics This is the old barrel
-
Ignition barrel replacements for 1400???
The actor damaged mine so hoping I can get it replaced with a new one. I tell you what happens witrh my one. They said they may not be able to get one.
-
Ignition barrel replacements for 1400???
Just wondering if there are any Ignition barrel replacements for 1400? Like off a picticula Nissan / Datsun model etc? I may have to get my one replaced / rebuilt.
-
1976 Subaru GF Hardtop
Yup sweet as dude. Give me a pm if hes not after one.
-
torque settings/rebuild info ea71
Yup and yup lol
-
torque settings/rebuild info ea71
I can help out too. Ive got a subaru 1400/1600 tightening torque and maintance standard manual
-
1976 Subaru GF Hardtop
Do you have a GSR badge for the back? Mine is missing it coz some one stole it off it
-
1976 Subaru GF Hardtop
My Vortex 6s are only trial cars. We only got a few here in nz.