xforxlifex

yea i almost had one for 100 bucks on ebay but the every last second i got outbid. Must have been one of those auction snippers. What are you boosting?

Ok you sorta confused me with all the bends and what not but its ok. Basically all i gotta do is figure out how to fit it to the turbo side and the throttle body. am i right? out of curiosity what intercooler are you running on your rx?

I know which hole is in inlet and outlet. Im gonna be using the rx7 intercooler. So how would i plum it in? into one of the inlet or outlet hoses? Ive never had to do this before so im just curious.

Ok im talking abou the ea82t. There is the inlet and the outlet, which goes to the trottle. On the stock plennum(sp?) there is another hose that, i think, comes from the thermostat housing. what is this for and what are u supposed to do with it when plumbing an intercooler?

I think its a great idea, there wouldnt be as much sifting through the stuff you dont want to read. But dont worry id still look at this one, im alwways interested in hearing about all the other awesome subes.

Well my computer is a piece of crap... i dont know why that link didnt work. the search is fine im just stupid and totally missed that. thanks.

Yes qman yours worked fine thank you for your help. mike

Well, that didnt work but i did find what you meant to post. thanks i guess.

yep i know youre all sick and tired of the 5 lug swap questions but i have another. AND YES i have searched the archives so no need for rude comments. Ok what are the exact parts needed to do this conversion? im talkin front and back. And what is the over all average cost saying i got all my parts from a junk yard? mike

yea you may be right about the copper i just remember hearing that once. Anyway, so you think the stock pistons will do the job with boosts around 13psi?

Ok im planning a future engine rebuild for me EA82T. How should i go about this. suggestions on head gaskets. Ive heard of people using gold head gaskets i think it was. Also i wanna put in higher compression pistons. im only looking for like an 8.0:1 ratio. are there any shops that sell them? Suggestions please!!!!

i would definetly be interested in that for my rx. i got 50 bucks.

Really low oil pressure like that can be due to bad bearings. How many miles does it have has it been rebuilt?

oh wow that sounds easy. i thought i was gonna have to get under the car. thats why i asked cuz its just to cold to be underneath a car this time of year.

where is the adjuster for the e-brake on an 89 rx?

Sometimes at high rpm with the clutch fully depressed and i shift into second i get a quick grind. Its never done this before and it started last night. I havent checked the fluid level yet so that could easily be a possibility. any ideas why?

My favorite part is the "custom exhaust leak"

anyone else have any input on this or have this issue?

all tires of same brand, size, and wear.

Ok i used my diff lock in this recent snow storm and even though its in the off positions its still on on the dash and the diff is still locked up. What do I do? Could this be a ****ty ground or a ****ty switch?

Thanks alot. Do you have a web site of a dealer that sells those? i did a search on them and couldnt find anything to informal.

Yea im looking to get snow tires for my rx for better traction in this crappy new england weather. Also what is the stock tire size on an 89 rx mike

I had the same deal with my Rx. I replaced the thermostat and its been fine since.

ooooooooooooooooooooooooooooooooooooooooook

What models came with the spider intake? How hard is it to find these at a junkyard? mike