I'm starting a full business making Subaru parts intakes, some bumpers, bull bars, headers etc.... I need product ideas. If there's a part you want made better that you already have? Send me a picture and give me a description

A winch-mount front bumper and swinging, spare-holding rear bumper with gas can mount(s) would be nice. rocker panel armor/sliders, maybe some integrated skid plates with said products. maybe its just me, but I'd really like to see an extended, long travel set up similar to what the prerunner guys run; but when you start spending more on suspension then your car's worth things can get real impractical real quick...

Skidplates

Light guards

Roof racks

Roll cages/Roll bars

 

I bet you could get a pretty good EA series strut bar made and people would want it...

4x100 hub redrills theres alot of 2wd people who would want that.

 

SNORKEL.

 

 

Thats all i can think of that isnt already being made.

I'm going for mainly headers but ill do a line of bumpers when I figure a good design. And roll bars that are strictly for looks.

Any plans for dual port EJ headers?

(I still need to order my SPH! Hell I was the one who suggested that whole idea! My check from da gumment aint showed up yet... :-p Damn Student loan disbursements take FOREVER!!!)

 

Custom cat-backs maybe? (or cat to muffler at least)

 

Lots of tube bumpers!

 

That's all I can think of.

I'm going to be working on an un equal length header this weekend however I need donor cars for test fitment and for making custom aluminum intakes.

I'm going to be working on an un equal length header this weekend however I need donor cars for test fitment and for making custom aluminum intakes.

 

What kind of deal do the donor car owner get??

Donor car gets 25 % off.

Howbout do it your self subaru speacalty tools have some realy good homade subaru tools and diagnostic tools

Not able to make diagnostic or specialty tools unfortunately

I'm going for mainly headers

east coast folks need exhaust parts due to rust.

 

both daily drivers i've had to weld back together and my buddies we just did last month and another forester needs more welding....all 2000+ model Subaru's.

 

but, all older subaru's have rusted away so the market around here for old stuff is almost non existent. my last 2 1980's Subaru's I bought came from Texas and California.

what about a light bar with skid plate that is all under the front bumper

something similar to this but for an EA82 car

http://www.ultimatesubaru.org/forum/showthread.php?t=119224 one of these!

Those do look good. I'll see about something like that after the header prototyping. Now how about some company name suggestions

Dirty Wagon Industries? DWI for short, might be kinda catchy.. may mislead customers to think you only make things for wagons though..

 

Soobtubes/Soobtoobs? STS for short? Considering the round nature of your products..

 

I'll let you know if any more pop into the ol noggin.

I'm going to be building products for other cars as well. I think I may go with edge fabrication.or baha fabrication/ performance exhaust

Better bumper side mounting for all plastic bumper cars and rad support protectors to prevent tow truck damage have had many with rad support pushed up by tow trucks causes unseen but bad damage

business is official. company name is inferno fabrications LLC. no i need some people for donor cars. preferably willling to leave their car for a full day or weekend. to get some intakes built. some headers. will be doing other cars besides subaru as well. website should be up and running in a week or so.

business is official. company name is inferno fabrications LLC. no i need some people for donor cars. preferably willling to leave their car for a full day or weekend. to get some intakes built. some headers. will be doing other cars besides subaru as well. website should be up and running in a week or so.

 

Good Luck with your new venture!!

i thought i replied to your pm but it looks like i forgot to hit send. what is it that you would like built for you car? i was a bit confused on what your ideas were about your project

I need hubs to convert to a 4x100 lug pattern.

Lots of tube bumpers!

 

That's all I can think of.

 

Who Makes tube bumpers????

I've made a few tube bumpers. And I can't drill hubs yet pooparu

Booooo