http://imgur.com/7Slevtg
what is this? And how do I fix the broken wire?

powered up by IGN circuit, it allows idle speed fuel to flow. It looks the same as one of mine - brittle insulation on wire, gets knocked, snappo. Word is you can buy new after market. Will likely affect your running, won't idle. Helps shut engine off when you switch IGN off. Might be called anti dieseling solenoid

powered up by IGN circuit, it allows idle speed fuel to flow. It looks the same as one of mine - brittle insulation on wire, gets knocked, snappo. Word is you can buy new after market. Will likely affect your running, won't idle. Helps shut engine off when you switch IGN off. Might be called anti dieseling solenoid

Can I just solder it back on?

Can I just solder it back on?

 

Not much to loose by trying.  Clean it first.  Use a new flexible piece of wire.  Seal it up with some electrical grade RTV after.

You can also take it off and gut it. There is a spring and pin inside.

 

Take the pin and spring out, put it back on.

 

Not ideal, but it will get you going until you find another one. (I was unable to find one, but you might have better luck)

 

Dan