slump Posted December 9, 2020 Share Posted December 9, 2020 Is there anyway to rewire or reprogram a 2000 forester into unlocking all the doors when you push the key fob unlock compared to just the driver side? it would be soooo much more convenient, thanks Quote Link to comment Share on other sites More sharing options...
ronemus Posted December 9, 2020 Share Posted December 9, 2020 My Legacies ('90 & '02) and Outback ('17) unlock the driver's door with the first push of the unlock button and all doors after a second push; check your owner's manual, but I'd be very surprised if your Forester works differently. Quote Link to comment Share on other sites More sharing options...
lmdew Posted December 9, 2020 Share Posted December 9, 2020 Push Unlock 2x. No way to reprogram that I know of so a single push will unlock all. Quote Link to comment Share on other sites More sharing options...
heartless Posted December 9, 2020 Share Posted December 9, 2020 yup, 2002 Forester... 1 click for drivers door, 2 for all doors same on our 06 Outback Quote Link to comment Share on other sites More sharing options...
slump Posted December 9, 2020 Author Share Posted December 9, 2020 so weird, i’ve tried the double click and it’s never worked, my key fob has seen better days to say the least so maybe it’s just getting old Quote Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted December 9, 2020 Share Posted December 9, 2020 second click must be within a few seconds. Quote Link to comment Share on other sites More sharing options...
forester2002s Posted December 9, 2020 Share Posted December 9, 2020 (edited) Does your key-fob have fresh batteries? Is the key-fob OEM? or after-market? Edited December 9, 2020 by forester2002s Quote Link to comment Share on other sites More sharing options...
Numbchux Posted December 9, 2020 Share Posted December 9, 2020 No "reprogram" But a few minutes with the FSM wiring diagrams you can modify it. There are 2 outputs from the keyless entry unit or body integrated unit (My 2000 Outback has a keyless entry module, where my 2004s have a BIU, I'm guessing the 2000 Forester is the former). One goes to the driver's door, and the other to all the other doors. Cut both wires, splice both of the body-side wires together to the output on the module that used to go just to the driver's door. And poof, they all open on the first click. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.