Dickensheets Posted August 28, 2005 Share Posted August 28, 2005 I want a 1/2" drive socket for wheel lugnuts, 97 OBW. Any ideas on what size this would be. Bonus question: What size is the cam nut on my DOHC 2.5. Ryan Link to comment Share on other sites More sharing options...
Subie Gal Posted August 28, 2005 Share Posted August 28, 2005 lugnuts = 19mm Jamie Link to comment Share on other sites More sharing options...
RallyKeith Posted August 28, 2005 Share Posted August 28, 2005 Cam bolts = 17mm Link to comment Share on other sites More sharing options...
GLCraig Posted August 28, 2005 Share Posted August 28, 2005 a 3/4" socket will work well with the lugnuts too since 19mm in 0.748in. Link to comment Share on other sites More sharing options...
Dickensheets Posted August 28, 2005 Author Share Posted August 28, 2005 You guys rule! Thanks Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted August 29, 2005 Share Posted August 29, 2005 You guys rule! Thanks Probably need a 'deep' style socket - 6 sided probably preferred. Carl Link to comment Share on other sites More sharing options...
Gnuman Posted August 29, 2005 Share Posted August 29, 2005 Probably need a 'deep' style socket - 6 sided probably preferred. Carl Actually, standard size is fine for both of those applications. Prefer a 6 point socket, 1/2" drive for them. Link to comment Share on other sites More sharing options...
bigjim5551212 Posted December 14, 2006 Share Posted December 14, 2006 dont substitute 17mm for 11/16" its not close enough for me. and if you have any 21mm the 13/16 sometimes does not cut it. Link to comment Share on other sites More sharing options...
NoahDL88 Posted December 14, 2006 Share Posted December 14, 2006 Go metric, and don't look back, the rest of the world has Link to comment Share on other sites More sharing options...
ShawnW Posted December 14, 2006 Share Posted December 14, 2006 Go metric, and don't look back, the rest of the world has No, the rest of the world never bothered with SAE... BTW you may want to avoid cheap impact sockets with Subaru wheels as they are too thick and will rub on some of the styles of the alloys. Link to comment Share on other sites More sharing options...
NoahDL88 Posted December 14, 2006 Share Posted December 14, 2006 No, the rest of the world never bothered with SAE... BTW you may want to avoid cheap impact sockets with Subaru wheels as they are too thick and will rub on some of the styles of the alloys. Actually, i've found the opposite to be true, my matco and snapon stockets are too big for a lot of the really cheap aftermarket wheels, but my 12 pt crapsman fits in there real nice. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now