August 28, 200520 yr I want a 1/2" drive socket for wheel lugnuts, 97 OBW. Any ideas on what size this would be. Bonus question: What size is the cam nut on my DOHC 2.5. Ryan
August 29, 200520 yr You guys rule! Thanks Probably need a 'deep' style socket - 6 sided probably preferred. Carl
August 29, 200520 yr Probably need a 'deep' style socket - 6 sided probably preferred. Carl Actually, standard size is fine for both of those applications. Prefer a 6 point socket, 1/2" drive for them.
December 14, 200619 yr dont substitute 17mm for 11/16" its not close enough for me. and if you have any 21mm the 13/16 sometimes does not cut it.
December 14, 200619 yr Go metric, and don't look back, the rest of the world has No, the rest of the world never bothered with SAE... BTW you may want to avoid cheap impact sockets with Subaru wheels as they are too thick and will rub on some of the styles of the alloys.
December 14, 200619 yr No, the rest of the world never bothered with SAE... BTW you may want to avoid cheap impact sockets with Subaru wheels as they are too thick and will rub on some of the styles of the alloys. Actually, i've found the opposite to be true, my matco and snapon stockets are too big for a lot of the really cheap aftermarket wheels, but my 12 pt crapsman fits in there real nice.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now