Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Fixed the RX finally!!!

Featured Replies

Yeah, its a miracle! On my way to reno today the 3# piston decided to go. Im thinking it was the crank bearing 1st, then the rest to follow. That baseball sized hole in my block is going to cause some problems with my PCV system isnt it?

 

:banghead:

 

-Brian

  • Author

Not in California :( The RX would have had to been offered with a 2.2 in order for the swap to be smogable.

 

-Brian

So now a replacement EA82T engine to follow eh? Fun stuff, if you need help let me know.

you really think the idiot at the smog test station will know the difference? lol...

u can put any engine it seems. i called up the air and resourrce board and they said it was ok to put a ej25 engine. ala all those vanagons with subaru engines in them down socal.

u can put any engine it seems. i called up the air and resourrce board and they said it was ok to put a ej25 engine. ala all those vanagons with subaru engines in them down socal.

 

Kennedy Engineered Products aquired C.A.R.B. excemptions for Vanagons owners that use their kits and as such they are legal but from what I have heard any other car mod that doesnt have CARB approval has to seek it before doing the change over.

that sucks to hear. But it will give you a chance to start over with the car.

  • Author

Ok Eddy... you prove me wrong. But IM not going to spend months to do a EJ conversion, just to find out it wont ever pass smog again and is useless. I have a buddy that did a EJ22 to a EJ22T conversion, and he said that was a huge pain in the rump roast to get CARB'd. That, and I dont have much time to figure something out.

 

I think Tizzle has got it tho... this is a chance to start over. Im thinking maybe a carbbed block, gen3 heads... this should give me a chance to rebuild a EA82T and get the RX running the way it should. However, that is going to take a while. Weeks, maybe a month or so... and that just time I dont have.

 

:banghead::banghead::banghead::banghead::banghead::banghead:

 

-Brian

That sucks man. You got any pics?

 

Do you know why it failed, oil pump, to lean, just old?

 

If you need anyhting let me know. The yards up here pale in comparison to Sac but there is an 86 turbo wagon, if you need anything let me know.

 

Good luck

  • Author

No pictures just yet, I have to find a way to push the car up my driveway into my garage. Then I can start dismantling it.

 

The junkyards here haven't had a EA82T in their yard for a while. But Im thinking of taking another trip out there next weekend.

 

-Brian

Hey Brian, if your'e heads are OK I would just use an SPFI, or carb engine. If U run stock boost, and good gas it should run fine, and make more power all across the board:brow: CARB wouldn't be able to spot that one, and the long block should be eazy to come by.

 

Just my$.02

  • Author

Yeah, Subieman has a carbbed EA82 in Reno he said I could get. I was thinking of going that way, but Im not sure if I wanna stick with stock boost. Not even sure if I want a turbo car anymore...

 

-Brian

That sucks Brian

 

if you need I might have a rebuildable core EA82T soon.

 

oh as for the engine swap it can be done here in CA. You can look at all the details for your self on the BAR website. Basically it has to be a motor from a newer vehicle(not a problem with an EJ22). You will need all the emissions stuff from the doner vehicle(not much on an EJ22) and last of all it needs to be inspected by a referee and givin a tag for future smog inspections.

 

and yeah.. us guys who do the testing just might notice the difference;)

 

oh yeah a high compression block will raise NOX keep that in mind.

  • Author

Okay, anyone want a RX to do a EJ swap on? Im entertaining offers, just PM Me.

 

I think im going to look for a Legacy, get my EJ22 swap the easy way. I dont have time to deal with a swap and bar and carb and ca and everything else... right now Im in need of a way to get to work and home. Maybe a good huffy is in order.

 

-Brian

If you got a WHOLE legacy... could you grab the Vin off it and everything and make your RX a legacy with an RX body??? :brow: Ok I'm getting kinda creative... but you never know.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.