DaveT Posted December 10, 2006 Share Posted December 10, 2006 Here is an inside view of the $300.00 + OEM EA82 SPFI Fuel pump. Nice little DC motor turns nice little roller pump. The whole thing, brushes, armature, and all, is in the gasoline! While there are only 2 of the 3 items needed to make fire, would you ever think of running a motor with a comutator in a combustible liquid? Looks like the comutator is worn a bit, 180K miles or so, the pump had become intermittant to start running. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 10, 2006 Share Posted December 10, 2006 While there are only 2 of the 3 items needed to make fire, would you ever think of running a motor with a comutator in a combustible liquid? No, I would not. But since liquid gasoline is NOT combustible, it's no problem at all. Gasoline vapor is highly combustible. In it's liquid form it's as safe as milk. If the tempurature is low enough, you can put a match out by dunking it in a bowl of gasoline. GD Link to comment Share on other sites More sharing options...
Frank B Posted December 10, 2006 Share Posted December 10, 2006 And the gasoline acts as a coolant to keep the motor from overheating and destroying itself. Link to comment Share on other sites More sharing options...
NorthWet Posted December 10, 2006 Share Posted December 10, 2006 No, I would not. But since liquid gasoline is NOT combustible, it's no problem at all. Gasoline vapor is highly combustible. In it's liquid form it's as safe as milk... Not entirely true (but essentially so for normal situations). It has to do with temperature and not phase. Heat liquid gasoline up to above its flash point and introduce an oxidizer and it will readily combust. You touched on the "normal situation" aspect: ...If the tempurature is low enough, you can put a match out by dunking it in a bowl of gasoline. GD It isn't that the liquid phase is noncombustible, but rather that if its temperature is low then any minor heat source ("match") has its heat spread-out/dissipated too rapidly to provide enough energy to start combustion. Link to comment Share on other sites More sharing options...
jeffast Posted December 10, 2006 Share Posted December 10, 2006 the fuel pump in my style of blazer tend to go out evrey 40-50000 miles if you let the tank run below 1/4 because they over heat Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 10, 2006 Share Posted December 10, 2006 Yeah - that's the technical aspect of it. Thermodynamics and material sceinces aren't my major study areas. But the practical nature of it is that it's perfectly safe "in this situation" GD Link to comment Share on other sites More sharing options...
NorthWet Posted December 10, 2006 Share Posted December 10, 2006 But the practical nature of it is that it's perfectly safe "in this situation" GD Agreed. Just didn't want some fool having a gas puddle on some hot part and think that it was safe to play with. (And maybe making the next Darwin Awards, with last words being, "GD said it was safe as milk..., so hold my beer and watch THIS!!! ) Link to comment Share on other sites More sharing options...
jeffast Posted December 10, 2006 Share Posted December 10, 2006 (And maybe making the next Darwin Awards, with last words being, "GD said it was safe as milk..., so hold my beer and watch THIS!!! ) there goes my darwin Link to comment Share on other sites More sharing options...
bgd73 Posted December 11, 2006 Share Posted December 11, 2006 I have an spfi sitting here and thought once about taking it apart (13 years and 161k). It was approaching intermittent, until i painted the exterior of pump and it went back to like new. Great photo- I wonder what a windshield wiper motor could do... Just a decade has millions and millions of revolutions at 100k miles. The cold fuel no doubt is the pump saver.... keep those trunks lined, and wagons behind the seats, it saves the fuel pump in the shade I took a liner out of my sedan trunk and the car ran differently, it changed the fuel pump- because it got warmer. warm fuel at pump is bad news unless it is new enough not to notice. Q: What does actual pumping in photo, all I see is engine. Link to comment Share on other sites More sharing options...
DaveT Posted December 11, 2006 Author Share Posted December 11, 2006 Q: What does actual pumping in photo, all I see is engine. Above the screws there is a round part. The inner piece is turned by the motor shaft. It has slots that the 5 little rollers can move around in. They fly out, touching the inner surface of the ring shaped piece. The rotating center piece is not in the center of the ring, so the volume between rollers changes as they rotate artound the ring. There are ports that let the fluid in & out in the apropreate places. Link to comment Share on other sites More sharing options...
nipper Posted December 11, 2006 Share Posted December 11, 2006 Here is an inside view of the $300.00 + OEM EA82 SPFI Fuel pump. Nice little DC motor turns nice little roller pump. The whole thing, brushes, armature, and all, is in the gasoline! While there are only 2 of the 3 items needed to make fire, would you ever think of running a motor with a comutator in a combustible liquid? Looks like the comutator is worn a bit, 180K miles or so, the pump had become intermittant to start running. If you think thats scary, we wont even mention how the fuel sneder operates nipper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now