Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's This Wire Attached To My Engine???

Featured Replies

attachment.php?attachmentid=4828&stc=1&d=1177533984

Yes, the large end is a standard plug for a 120 volt wall socket you would find in your livingroom. It was on my old, dead EJ22. One end was at the bottom of the oil dipstic tube, the other by the flywheel window at the top of the tranny. I took it off last November and don't remember if it was connected to anything.

post-17879-136027622356_thumb.jpg

that's the limited production electrically assisted prototype EJ22.

 

 

 

 

 

for real. it's probably an engine block heater or a mechanism for charging the battery.

It is the power cord to your installed block heater. I have one too. If you are in a particularly cold climate, plugging that into 120VAC at night will keep teh coolant from freezing, which would damage your engine. That block heater is also part of the "cold weather package".

  • Author

Where is the heating device located at? Since I installed a different engine do I have to remove the heater from the old one????

Where is the heating device located at? Since I installed a different engine do I have to remove the heater from the old one????

 

It came with the cold weather package, If you have never used it before, you dont need to reinstall it.

 

nipper

 

PS unless you got the 20 mile extension cord option. Ever wonder why the spare tire well is so big?

 

 

hehehehe

  • Author

I found the heater thingy. It's underneath the engine, between the driver side exhaust and the oil pan. It screws into the block. I'll take a pic tomorrow.

ahhh the wonders of the engine block heater ;)

i wouldn't try to take that out if i were you... because to get it in there in the 1st place is a pain in the arse :eek: (as per the original coolant plug not coming out.)

if you plan on using it, you may want to clean out the contacts on the plug part (attached to the motor), and then plug it in, and rout the wire up through, and never un-plug it again... so you don't get crap built up in the connection.

 

Block heaters are awesome for arctic weather, and your car will thank you for it ;)

He lives in california, why does he need a block heater. I don't use a block heater even when it gets to -40C at times and my engine starts like normal.

  • Author
He lives in california, why does he need a block heater. I don't use a block heater even when it gets to -40C at times and my engine starts like normal.

 

Why do I need another Subaru??? Because! That's Why!!!:lol:

 

If it doesn't swap over easily, I'm not gonna bother with it.

i installed a block heater just so i don't have to listen to the piston slap when it get below 30º

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.