Jump to content
Ultimate Subaru Message Board

Recommended Posts

thats a hard one, as you can either have a cable or en electronic spedo. 1995 is when they switched.

 

Look under the hood, at the firewall around the master cylinder. You will see one cable, for the gas pedal. Do you see a second cable that loops down to the transmission?

 

Do you have any CEL lights?

 

nipper

Link to comment
Share on other sites

Your speedo is driven by a cable comming from the transmission. You can check up my log about regreasing the cable inside. maybe the notch is worn.

 

true on older models, newer ones have a pair of wires from the front speed sensor on the trans/front diff, passenger side kind of low, to the speedo.

 

depending which is cheaper or easier to come by, replace the sensor or speedo. i always thought it was the sensor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...