SO i have been looking around to find some front fenders for my 90 loyale wagon. I went to the local junk yards and had no luck finding a good set or pulling any. So i checked eBay, no luck, the classifieds here, no luck, and just starting to contemplate taking some serious action to get rid of rust! zzz But that wouldn't look very good, but at least better than rust.
Any pointers towards a good source for fenders? And at the same time, i need opinions on how to fix holes on the rear pannel behind the rear wheels. Rust is eating my car alive! Its a wheeler so i dont mind rough jobs to fix it. Get some sheets of metal and rivit it over? Use some kind of glue to make it weather proof? Thanks!
Welcome to Ultimate Subaru Message Board, my lurker friend!
 |
Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created. We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning ** Not an actual guarantee, but seriously, you probably won't regret it! Serving the Subaru Community since May 18th, 1998! |
Guest Message by DevFuse
Finding Body parts
Started by
hardtail_pride
, Jul 29 2009 05:57 PM
16 replies to this topic
#2
Quidam
-
- Members
- 1,416 posts
1000+ Super USER!
- USA
Posted 29 July 2009 - 06:54 PM
Hey,
Rock/Auto, $52.00 aftermarket front fender...but shipping might make you cringe.
I checked with a guy I bought 4 NOS fenders from, he's out.
You didn't ask but, rocker panels and fender arches were listed yesterday with ebay. Aftermarket.
That's all I got for you. hth
Doug
Rock/Auto, $52.00 aftermarket front fender...but shipping might make you cringe.
I checked with a guy I bought 4 NOS fenders from, he's out.
You didn't ask but, rocker panels and fender arches were listed yesterday with ebay. Aftermarket.
That's all I got for you. hth
Doug
#3
hardtail_pride
-
- Members
- 280 posts
Eat, Live, Breath Subaru
- Orem
Posted 29 July 2009 - 07:18 PM
So what your saying is i could get this whole piece from ebay? Its a horrible paint job but it shows on an old wagon i had what is now pretty much rusted out on my current wagon. Could you post a link? Thanks Doug:banana:
Let me know if the pic works!
Let me know if the pic works!
#4
Quidam
-
- Members
- 1,416 posts
1000+ Super USER!
- USA
Posted 29 July 2009 - 08:24 PM
Hi,
Here's one:http://shop.ebay.com...-All-Categories
Two:http://stores.shop.e...&LH_TitleDesc=1
No rear panels but they're easier to fabricate.
YW,
Doug
Here's one:http://shop.ebay.com...-All-Categories
Two:http://stores.shop.e...&LH_TitleDesc=1
No rear panels but they're easier to fabricate.
YW,
Doug
#5
hardtail_pride
-
- Members
- 280 posts
Eat, Live, Breath Subaru
- Orem
Posted 29 July 2009 - 08:31 PM
nice thank you for the link. I searched earlier today for that actually and couldn't find it by searching Subaru loyale and looking through all the listings. How did you come across them? Maybe there are more parts i need just hiding? 
Thanks for the links!
Thanks for the links!
#6
NoahDL88
-
- Members
- 4,264 posts
Elite Master of Cookies
- Bremerton, WA, USA
Posted 29 July 2009 - 08:33 PM
I have two front fenders sitting on top of my car, i'll let you have em for what i paid for them, free, plus shipping, although local pickup would be much more awesome.
#7
hardtail_pride
-
- Members
- 280 posts
Eat, Live, Breath Subaru
- Orem
Posted 29 July 2009 - 08:36 PM
that sounds like an amazing deal. Depending on shipping of course. I live in Orem Ut- 84058 . If you could get a quote that would be great! And they are EA82's right? Not severly dented or rusted? Thanks again:grin:
#8
Truckerman666
-
- Members
-
- 51 posts
USMB Regular
- Tremonton, Ut
Posted 29 July 2009 - 09:44 PM
look in the pic a part in Willard next to Smith and Edwards, Transwest ?, There are some of these cars with good parts and a brat with t tops and a subaru that is so old that i dont know what it is, it has round headlites.
#9
Truckerman666
-
- Members
-
- 51 posts
USMB Regular
- Tremonton, Ut
Posted 29 July 2009 - 09:47 PM
There is a lot of good interior parts to.
#10
Don_Quixpunch
-
- Members
- 125 posts
USMB is life!
- Salt Lake City
Posted 30 July 2009 - 01:28 AM
A Subaru you don't recognize with round headlights sounds perilously close to a 360. Did you happen to notice if the Brat with t tops was a first gen? I need fenders and a tail light.
As for later model EA's, have you checked out the Tear a Part in SLC? I saw several later EAs both there and at Pick n Pull.
As for later model EA's, have you checked out the Tear a Part in SLC? I saw several later EAs both there and at Pick n Pull.
#11
Truckerman666
-
- Members
-
- 51 posts
USMB Regular
- Tremonton, Ut
Posted 30 July 2009 - 05:55 AM
I dont know enough about brats to tell the difference
#12
Turbone
-
- Moderator
-
- 11,935 posts
The Original Rob
- WA
Posted 30 July 2009 - 10:22 AM
A Subaru you don't recognize with round headlights sounds perilously close to a 360. Did you happen to notice if the Brat with t tops was a first gen? I need fenders and a tail light.
As for later model EA's, have you checked out the Tear a Part in SLC? I saw several later EAs both there and at Pick n Pull.
Gen 1 Brats didnt come with T-Tops.
Also, all of Gen 1 Subaru's had round headlights till 82 I believe.
#13
Quidam
-
- Members
- 1,416 posts
1000+ Super USER!
- USA
Posted 30 July 2009 - 11:53 AM
"How did you come across them? Maybe there are more parts i need just hiding? :banana:"
Hi,
A regular e-mail notice is how I learned of those panels. BTW, JC Whitney has some too.
Well...parts are out there, what do you need? As you can see, folks here can and will help you out.
Doug
I just got barked at:)
Hi,
A regular e-mail notice is how I learned of those panels. BTW, JC Whitney has some too.
Well...parts are out there, what do you need? As you can see, folks here can and will help you out.
Doug
I just got barked at:)
#14
hardtail_pride
-
- Members
- 280 posts
Eat, Live, Breath Subaru
- Orem
Posted 30 July 2009 - 12:26 PM
Just need some front fenders at a reasonable price for and EA82
#15
kilgore
-
- Members
-
- 43 posts
USMB Regular
- Vancouver, BC
Posted 30 July 2009 - 05:13 PM
+1 on the EA82 fenders, mine are getting pretty gnarly!
If anybody in Washington is willing to sell a set I would be interested. I could pick them up as well. Shipping those things is quite spendy...
If anybody in Washington is willing to sell a set I would be interested. I could pick them up as well. Shipping those things is quite spendy...
#16
Rust
-
- Members
- 319 posts
Eat, Live, Breath Subaru
- The Sticks
Posted 30 July 2009 - 06:47 PM
I have a decent set of front fenders from a 91 loyale wagon. I'd be happy with $40 for the pair, but the shipping charges from CT to ? will probably cost more than finding a whole parts car in yor area. Look in your local area more.
#17
Txakura
-
- Members
- 948 posts
Not the Stig
- Albion, WA
Posted 30 July 2009 - 11:49 PM
I need one too, the left. (I'm a) Day late and a dollar short on this thread... as usual...
anyone got one lying around in 'Rio Red' paint code 946?
anyone got one lying around in 'Rio Red' paint code 946?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
