TheLoyale

Totally go to NCS out on Beloit Rd. Its $60 for 3 cans mix factory color. That is where I am going to get mine when I can, and they also sell POR-15!

Number 1 lead to cracked winshields is having rust forum in the window seat. I guess there is an update to the 3-Door, we just went and picked up a '96 Brighton 5spd which Might get swapped into the 3-door along with the an Duel-Port EJ22 - unless Fox goes with the XT6 5spd with Center Diff Lock. You can see the Brighton in the Subaru Alliance Shopday #12-14 videos on youtube.

Twitch, try pulling this 2500lbs car over 40 miles 20 miles of that was interstate with construction. Also, haven't you watched "Pimp My Ride" I'm sure they put a Chocolate waterfall in back of a Topaz at some point. Ben, You would be welcome to come chill with us as long as you don't start bustin' balls. This Legacy could go for $1,300 up here with ease.

The news is lies, WE are the reality. "We are the music makers, and we are the dreamers of dreams"

Yeah this is Foxs car, Either he's gonna flip it and make a bit'o paper, Or he's gonna pull the trans and rear diff and keep for his 3-door, swap in a FWD 4EAT and sell it. And really, it pulled it with ease, you just have to have a handel on the vehicle and don't try to correct it to much as constint little corrections will start to make un-stable as I have found out. Plus the Alignment on the Brighton is a little off and kinda makes it Dogtrack. All in all, I would do this again and I think I could handel pulling cars back from IN and such.

"Private Property, Hippie be quite, your peace sign T-shirt could cause a riot"

Pull home a '96 Brighton with my Outback. Tow bar FTW! As you can see in the Subaru Alliance videos and in the pics. Subaru Alliance Shopday #12 Subaru Alliance Shopday #13 More videos to follow this once I get them made on Pinnacle Studio.

$300 Legacy, swap on a new waterpump (Which came with the car) and used my old timing belt and tensioners. Got it running in an hour while it was still hitched to my car as you will see in the SUBARU ALLIANCE Videos (#12 and up)

I drug a '96 Brighton that was sunk into the mudd for 3 months and a wheel locked up, TW10 pull it right out. I also tow bar'd the car all the way to Milwaukee from Hartford. 70miles roundtrip. SUBARU ALLIANCE

WOW thats some bright light. That might be too bright for a maplight. Guess we'll see. I like the LED blinker idea, I am planning on doing High-power LEDs for my EA82 backup lights (Super super white) just for shiz and gigz. NIce work though!

Lol, that rings a bell

Yeah, I don't think Subaru changed much in connections over the years, EA82 Vs. 2nd gen Legacy proves that so I've found. Cheers and post pics and info when you get to doing it!

Find a GL-10 Turbo car, those are a direct swap as its still an EA82 chassis.

Watch out! Its the Flannel brigade!

I have seen that in the Alliance videos and in real life with Foxs 3-door. Zip-ties do work.

Alright, I should be able to come over Sunday, since later that night I'ma swing over to Dan's and check out some Legacy with'em.

That is sure a nice frame off resto right there. Its soooo white and clean, ummy nummy kinda goodness. Fox, I need to get back down by ya something this weekend and see whats going on with the 3-door and sh*t.

Lol, yeah. Cause we all know how much those #74 bulbs cost

Mine did too, but there are no power leads going to it. I think its just an extra bulb/socket they put with all clutsters.

Everything is straight forward when the motor is out and on a milk crate.

I just looked at mine, there are 3 10mm bolts which hold the Fuel pump. So you should have an extra hole there unless its been broken off at some point.

Their good motors, but timing belts are a headache LOL!

zzz

'97 Outback, please tell me its a SOHC!