legacy603

Can some one post a link to a ej25d head job and the brand of gaskets I should use and head bolts and maybe the best indeft Frankin swap I've been searching but not so much luck using my phone thanks guys and again sorry

when it comes down to ignition don't skimp out I had a similar problem with parts house wires until I switch to the subaru OEM wires and NGK plugs ran like a top after the switch

OK thanks guys I'll let you know what I find

OK that makes sense is it possible that my heater core is going without leaking. My heat has started to go in and out but not a lot maybe for 30 seconds or so

Thanks Loyale still blows my mind

Wow I don't think I have the room in the Lego for that monster

Someone pleas explain this link I got http://ka7co.com/photo/subaru/52edvc10hlv42sf425.jpg

I thought the same thing but the only hoses that are not brand new are the heater core hoses

Well guys I'm losseing coolent and the heeds where done about a year ago I was thinking intake manifold gaskets if that doesn't fix it I'll do the block test buts its a small loss maybe 12 to 18oz every 200 or so miles any tips would be great thanks

The NASIOC is where I found on the info for the ej20 swap for my 97 legacy great stuff on there

Well I wish I could offer up some help on the trans but I'm not to good with them however you could always use the search to find more info and remember we are all here to help teach and learn

Merry Christmas everyone and have a happy new year

That's not cool

Alright thanks guys I'll look in to it and as for rims Texan I have 06 impreza wheels now I'm going to sand blast and powder coat

So iv been looking all over the internet for engine dress up kits colored hoses etc.body parts head and tail lights I have no problem finding performance parts but when it comes down to customization other than that I can't find anything any tips would be amazing thanks in advance

So I'm looking into the wrx swap but would need a custom driveshaft where would I find one

Alright thanks for the info I found a complete setup engine trans and ecu the works for about 1500

Will it work?

I can't believe I didn't even think about the temp sensor I'm going to check that one out knock sensor seems fine and I cant get the video on my phone but thank you I'll post what I find

knock sensor even without a code?

The plugs are NGK the wires are Subaru timing is all less the 50k and not one code or pending code I'm at a loss

I have a problem I have the ej25 I have done plugs and wires fuel treatment and still have a real bad hesitation on acceleration any tips would be helpful thanks in advance by the way the engine only has 131k and 31k on a rebuild with a 20thousands bore

Rusty what site did you find the skins on I'm also looking mine got crushed by a jack a few weeks ago been looking ever since

Well after some work I got the control arm in just waiting to tighten everything up now I'm just putting in the new CV and tie rod ends then trying to line up the fenders and looking for a hood and bumper cover

Well after some work I got the control arm in just waiting to tighten everything up now I'm just putting in the new CV and tie rod ends then trying to line up the fenders and looking for a hood and bumper cover