Man this was the best 20 bucks I've ever spent, Installation was very easy, I did a test run on 7psi (stock) everyone was cool, then slowly I went up to 8,9 then 10psi

 

 

10 is where I'm leaving it for now until my Intercooler gets here.

 

 

WOW what a difference, this little suubie is turning into a monster!

 

 

For kicks I took a spin around the block with 15psi

 

WOW lots and lots of wheel spin

 

Here's the funny part, on 7psi I lost to a 98-00 Honda Prelude by about 1 and 1/2 car legnths, but today on 10psi on the highway I smoked one 3 times with 2 peepz in my car!!!!

 

HAHAH you guys should of seen the look on his face!

 

The fuel cut is pissing me off tho, but I found a way to bypass it

 

FLOOR IT, count to 5, quickly release foot enough to drop the PSI down around 7, then push it back to the floor.

 

REPEAT!!!

 

 

HAHAHAHA it works. PITA tho.

 

 

Any solutions to my fuel cut problem at 10psi?

 

 

I think I have a hotwire MAF, not sure tho, I'll check it out tomarrow.

yeah you should have a hot wire. no any easy fix for the fuel cut.

 

what kind of boost controler and where did you get it? I know they are simple little devices. I tried to build one but could not get the spring to work correctly.

I got it off ebay :

 

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=42604&item=2466840543&sspagename=STRK%3AMEBWN%3AIT

i had a board member make mine.. $10 shipped to the door

 

lucky me though, my RX has the old vane style maf and no fuel cutoff

 

you have a pretty fine car there.. gotta get some good pics of mine at some point..

ok ya i just wanted to know what that thing is??? what does it do???

 

thanks

me stupid...you zefy

MBC: manual boost controller, so you can change how much boost a turbo puts into the engine.

Where would I connect an MBC on my XT?

That's a heckuva price for that - just the brass tee and nipples retails for more than $10 at most parts stores! I wonder what the control is that he screws into the other port?

For the price and shipping, it can be made by anyone here (with basic mech skills). Subaru Tex made one, and I think he has the plans for it on his web site.

After reading the feedback on the Ebay Seller, I dont think I'd be willing to do business with him. To many negs.

the guy was great, shipping was fast and the product works great!

 

 

The guy is good in my book.

 

 

BTW with my ebay expierence its impossible to be have perfect feedback records when selling lots of items since there are allways those stupid people that complain.