Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

ATTN: EA82T tuners

Featured Replies

Just wanting to know what muffler U are using, and how loud is it? Right now all I have is a 2" mandrell bent down pipe, and a 2" in/out glass pack and 2" x 12" turn down. It's loud!

is the car loud or just loud inside? lengthening the pipe to the back near the axle will make a world of difference on inside exhaust noise.

fatter after-muffler pipes will help tone things doen

dynamax muffler 2.5

piping out the back makes a big differance too.

 

I ran the muffler straight the first day, too loud without a good tailpipe.

sounds like a wrx rumble now. not too loud;)

After 20,000 Harley Davidson motorcycles this past weekend, I don't think anyone would notice around here !

 

John Wilke

Milwaukee

'87 XT Turbo 2" pipe with glasspack

both my cars are muffler-less...

 

1987 XT Turbo with WRX exhaust from the turbo back, was a little loud for my taste (even with 3 converters), ive grown to love it. gave me a headache the first few days i drove it but it eventually grew on me

 

1985 RX with the stock exhaust and a straight pipe in place of the factory muffler - more to my liking, but the car is still gutless

I know that Hondasucks's 87 turbowagon has no muffler on it. It has a nice rumbly sound to it but its still not incredibly loud........................until you get on it:brow:

I just put on my custom designed catless downpipe. 2.5" OD w/ 1.5" wastegate bypass tube (enters approx 18" from flange) Wraped it with header wrap and put a Jegs three-way hiflow cat after the DP. Continued to the rear bumper with 2.5"

Some improvement in perf. but sounds very rodded, not riced.

Replaced factory intake pipe (coragated rubber hose from MAF to turbo) with a smooth curve section of 3" pipe and silicone couplings. Large K&N cone mounted in inner fender (no engine heat). Cockpit adjustable timing run at approx 25 BTDC at idle.

14 psi boost after the IC, H20 injection and hi boost activated aux fuel injection.

Still will not beat my factory 90 'Teg.

5 speed

Subatoad

 

____________

If you don't know where you are going

You can't get lost!

I have jsut the two cats on ym GL-10, its kinda quiet to me...others say it loud. The exhaust end about 12 inches from the 2nd cat.

 

The RX has the DP, no cat, and ends right after it comes down and bends back. Its LOUD.

My 87 RX has the factory down pipe and ends after it bends back. No cat and no muffler. It is loud.

My 86 XT Turbo has the factory down pipe, with the cat still intact. After the first factory connector, it's got 2 inch all the way back to the stock muffler location, and there it has a 2 in/2 out glass pack, with nothing after the muffler. It's pretty quite inside, and out at idle...it dosen't really roar until over 4,000 rpm...then it just plain sounds mean...

 

RedLance

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.