February 4, 200719 yr what do i need to add 4 wheel drive to my car and lift it i have read that certian lifts require modifications to the car i want to lift about 3 or 4 iches is there anything i have to modify that dosnt come with the lift kit ??
February 4, 200719 yr What is your Subaru? EA81, EA82, EJXX? In other words, MY Wagon, Hatch or Brat, Loyal GL/DL, Legacy, Outback? Or again in other words, what year and shape? heh.. Is it 4WD now, or 2WD?
February 4, 200719 yr someone just asked almost this exact same question: http://www.ultimatesubaru.org/forum/showthread.php?t=70893
February 5, 200719 yr With a lift you may want bigger tires, and cut out the fender wells to make room for them
February 5, 200719 yr what do i need to add 4 wheel drive to my car and lift it. Sell it and buy a 4WD. You'll end up buying one anyway for all the parts you need (it's cheaper than buying them seperate, trust me). So there's just no point in doing a conversion. Keep it nice, sell it, and buy a 4WD to start with. The hassle of conversion isn't generally worth it unless the body is something really, really special. I did it, and as I've told many folks here - I'll never do it again. The time investment is not worth it for a 20 year old car when 4WD's are reddily availible. GD
February 11, 200719 yr Aren't EA82's easier to convert than ea81's? something about all the mounting bolt holes already being there?
February 12, 200719 yr Aren't EA82's easier to convert than ea81's? something about all the mounting bolt holes already being there? the mounting holes aren't there. you have to drill and tap 4 in the back for the mustache bar, and fab something for the center carrier bearing. BUT. on EA82s, the gas tank is the same. EA81s need to swap the gas tank to make room for the rear diff.
February 15, 200719 yr i know where a ok to good body is for you to swap your motor into. the guiy wants 200 bucks for the car,with bad motor and no wheels.bring your wheels and you could get a rig that is already a 4wd. wouild need to be towed.
February 15, 200719 yr i know where a ok to good body is for you to swap your motor into. the guiy wants 200 bucks for the car,with bad motor and no wheels.bring your wheels and you could get a rig that is already a 4wd. wouild need to be towed. There are only, like, 12 of those at Pull 'n' Save right now...hee hee;)
February 16, 200719 yr yeah,but you can't buy an entire car there for 200 bucks. Okay, you got me there. By the way, what IS their policy on whole-car extraction? (Sorry for the hijack...think of it as a free bump to the top)
February 18, 200719 yr Author Okay, you got me there. By the way, what IS their policy on whole-car extraction? (Sorry for the hijack...think of it as a free bump to the top) so if i get biiger tires and and four wheel drive all of that off road goodness what should i watch out for wear wise like getting good at clutch replacing or wheel bearings or what im kinda curious i like working on cars but i dont want to do it on a daily basis lol
February 18, 200719 yr so if i get biiger tires and and four wheel drive all of that off road goodness what should i watch out for wear wise like getting good at clutch replacing or wheel bearings or what im kinda curious i like working on cars but i dont want to do it on a daily basis lol Help me out here................ You are asking about repair frequency on a 20 year old car, that you are going to modify, and then thrash? Are you serious? Maybe leasing a Toyota Yaris for 3 years might be more suitable?
February 19, 200719 yr Help me out here................You are asking about repair frequency on a 20 year old car, that you are going to modify, and then thrash? Are you serious? Maybe leasing a Toyota Yaris for 3 years might be more suitable? no need to thrash. I wouldn't worry about any extra wear and tear from the bigger tires etc. it all depends on HOW you drive it. if you're hard on the clutch...you'll wear out the clutch, regardless of the tire size. if you spend alot of time submerged, you might reduce the lifetime of your wheel bearings, but not much. My blue wagon had 235k miles on it when I sold it, and I'm quite sure (judging from the maintenance of the rest of the car) that the wheel bearings are factory original. and I only replaced one, and the iron-rich water is VERY hard on bearings... if you are trying some serious uneven wheeling (like the rocks up here...) you'll probably bend and twist the control arms, leading rods, and maybe even the unibody.... the majority of the maintenance that you'll have to do will depend far more on the current condition of the car than the modifications.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now