michael appel Posted June 14, 2009 Share Posted June 14, 2009 When I get back from michigan if anyone is intrested me and my friends are building and installing lifts please let me know if you want one we are keeping the price low just shoot us up ea71 ea81 ea 82 you bring it we will build it thanks mike Quote Link to comment Share on other sites More sharing options...
rkjbutter Posted June 17, 2009 Share Posted June 17, 2009 I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. Quote Link to comment Share on other sites More sharing options...
86ROO Posted July 3, 2009 Share Posted July 3, 2009 hey I have a question. Im in the middle of building my own lift kit. I have all the parts eccept for spacers for the rear pivot arms by the fuel pump. The lift kit I making is a 4" lift and I was wondow do i make a 4" spacer for the pivot arms or is shorter. If you could help I would be very greatful thanks Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted July 3, 2009 Share Posted July 3, 2009 hey I have a question. Im in the middle of building my own lift kit. I have all the parts eccept for spacers for the rear pivot arms by the fuel pump. The lift kit I making is a 4" lift and I was wondow do i make a 4" spacer for the pivot arms or is shorter. If you could help I would be very greatful thanks its a EA82?? if so go shorter none or 2" drop the diff thou if you dont drop the pivot tube Quote Link to comment Share on other sites More sharing options...
86ROO Posted July 4, 2009 Share Posted July 4, 2009 yes its a ea82. I was planing on droping the the diff 2" so the axles dont bind ,but the im worried that torion bar might break if i dont lower the frt part of the rear suspenion. the other thing i was looking for was the frt strut spacers. I've seen other spacers that dont look like they have the camber offset that is needed i am looking for 0 cmber in frt so the tires dont shave the out side edge. Quote Link to comment Share on other sites More sharing options...
Pooparu Posted July 8, 2009 Share Posted July 8, 2009 Gen 1 BRAT Please!!! Quote Link to comment Share on other sites More sharing options...
michael appel Posted July 8, 2009 Author Share Posted July 8, 2009 Alright Im back and bumping this been on vacation for a minute why are you dropping the torsion bor on a 4 inch it is placed just right for a four if it was a six I would space it down just drop the struts and the diff and the mustache has to come down and it will still be a good ride Quote Link to comment Share on other sites More sharing options...
michael appel Posted July 8, 2009 Author Share Posted July 8, 2009 Gen 1 BRAT Please!!! If I make you kit could you make me a decal for a hood of a anime character It would be a great present for my sister Quote Link to comment Share on other sites More sharing options...
michael appel Posted July 8, 2009 Author Share Posted July 8, 2009 I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. Im all ears and ready for anything let me know I have a project of a friends just sitting for a lift looking at maybe a 8 inch for his Quote Link to comment Share on other sites More sharing options...
Pooparu Posted July 10, 2009 Share Posted July 10, 2009 If I make you kit could you make me a decal for a hood of a anime character It would be a great present for my sister I will make is so mike. Quote Link to comment Share on other sites More sharing options...
michael appel Posted July 17, 2009 Author Share Posted July 17, 2009 I will make it this weekend monday or tuesday and get back to you Quote Link to comment Share on other sites More sharing options...
Pooparu Posted July 20, 2009 Share Posted July 20, 2009 I will make it this weekend monday or tuesday and get back to you Who, me? Quote Link to comment Share on other sites More sharing options...
jayare12 Posted July 29, 2009 Share Posted July 29, 2009 hey i just bought one with a 6 inch lift and was wonderin what you guys could get me for the front strut tower I have lots of parts for trade or can pay. will try and get pics of all my lift parts installed so you can offer advice. Quote Link to comment Share on other sites More sharing options...
hardtail_pride Posted August 4, 2009 Share Posted August 4, 2009 (edited) So if i understand right, your making affordable lifts? I hope so, any chance you'd make a 2" lift for a 90 loyale wagon? With all the bolts and pieces straight "Bolt in" system with lengthened steering shaft? Thanks Edited August 4, 2009 by hardtail_pride Quote Link to comment Share on other sites More sharing options...
E-RPM SOFT COM Posted August 12, 2009 Share Posted August 12, 2009 I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. E-RPM SOFT COM 336-793-0285 Quote Link to comment Share on other sites More sharing options...
Spiffy Posted August 21, 2009 Share Posted August 21, 2009 bump for me sending you a PM for some details... Quote Link to comment Share on other sites More sharing options...
rkjbutter Posted August 24, 2009 Share Posted August 24, 2009 I would like to look in to making a kit were i can get more than 8inches of travel. what the kit might take. 1.Use blocks to lower the sub frame 2.Instead of using blocks for the struts, replace strut with coil springs and shock. Other ideas might include lenthing the control rods to place the hubs outside the car. Welding in a sub frame then use a four link style suspension, to put in solid axles and a t-case. Quote Link to comment Share on other sites More sharing options...
michael appel Posted August 25, 2009 Author Share Posted August 25, 2009 Let me put that on paper and see what I get Quote Link to comment Share on other sites More sharing options...
BLUE84GLWAGON Posted January 4, 2010 Share Posted January 4, 2010 HOW MUCH FOR A 4inch lift 84gl wagon, shipped to texas, I WOULD LIKE TO BUILD MY OWN BUT KNOW NOTHING ABOUT LIFTING ONE YET ? 817-999-1763 CALL ANYTIME Quote Link to comment Share on other sites More sharing options...
hippyloc Posted January 20, 2010 Share Posted January 20, 2010 Can you do a 3" for an '81 GL wagon? How much is it going to be? I'm local, so no shipping. Is it bolt in, or is there welding/mod involved, aside from steering length? Quote Link to comment Share on other sites More sharing options...
blownchevelle503 Posted April 21, 2010 Share Posted April 21, 2010 I have a 1980 1600 4wd hatch, how much would you charge for a 2-4 inch lift? Kyle B. Salem, OR Quote Link to comment Share on other sites More sharing options...
michael appel Posted June 2, 2010 Author Share Posted June 2, 2010 (edited) 250 for 2 inch 500 for 3 or 4 havent done a 6 yet but if anyone wants to loan a car and 300 lets get it on Edited June 22, 2010 by michael appel Quote Link to comment Share on other sites More sharing options...
michael appel Posted June 2, 2010 Author Share Posted June 2, 2010 I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. E-RPM SOFT COM 336-793-0285 hit me up with your ideas Quote Link to comment Share on other sites More sharing options...
michael appel Posted June 2, 2010 Author Share Posted June 2, 2010 Can you do a 3" for an '81 GL wagon? How much is it going to be? I'm local, so no shipping. Is it bolt in, or is there welding/mod involved, aside from steering length? bolt on Quote Link to comment Share on other sites More sharing options...
michael appel Posted June 2, 2010 Author Share Posted June 2, 2010 I am ready anyone else wants some I lost my job and Im building let me know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.