June 14, 200916 yr When I get back from michigan if anyone is intrested me and my friends are building and installing lifts please let me know if you want one we are keeping the price low just shoot us up ea71 ea81 ea 82 you bring it we will build it thanks mike
June 17, 200916 yr I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take.
July 3, 200916 yr hey I have a question. Im in the middle of building my own lift kit. I have all the parts eccept for spacers for the rear pivot arms by the fuel pump. The lift kit I making is a 4" lift and I was wondow do i make a 4" spacer for the pivot arms or is shorter. If you could help I would be very greatful thanks
July 3, 200916 yr hey I have a question. Im in the middle of building my own lift kit. I have all the parts eccept for spacers for the rear pivot arms by the fuel pump. The lift kit I making is a 4" lift and I was wondow do i make a 4" spacer for the pivot arms or is shorter. If you could help I would be very greatful thanks its a EA82?? if so go shorter none or 2" drop the diff thou if you dont drop the pivot tube
July 4, 200916 yr yes its a ea82. I was planing on droping the the diff 2" so the axles dont bind ,but the im worried that torion bar might break if i dont lower the frt part of the rear suspenion. the other thing i was looking for was the frt strut spacers. I've seen other spacers that dont look like they have the camber offset that is needed i am looking for 0 cmber in frt so the tires dont shave the out side edge.
July 8, 200916 yr Author Alright Im back and bumping this been on vacation for a minute why are you dropping the torsion bor on a 4 inch it is placed just right for a four if it was a six I would space it down just drop the struts and the diff and the mustache has to come down and it will still be a good ride
July 8, 200916 yr Author Gen 1 BRAT Please!!! If I make you kit could you make me a decal for a hood of a anime character It would be a great present for my sister
July 8, 200916 yr Author I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. Im all ears and ready for anything let me know I have a project of a friends just sitting for a lift looking at maybe a 8 inch for his
July 10, 200916 yr If I make you kit could you make me a decal for a hood of a anime character It would be a great present for my sister I will make is so mike.
July 29, 200916 yr hey i just bought one with a 6 inch lift and was wonderin what you guys could get me for the front strut tower I have lots of parts for trade or can pay. will try and get pics of all my lift parts installed so you can offer advice.
August 4, 200916 yr So if i understand right, your making affordable lifts? I hope so, any chance you'd make a 2" lift for a 90 loyale wagon? With all the bolts and pieces straight "Bolt in" system with lengthened steering shaft? Thanks Edited August 4, 200916 yr by hardtail_pride
August 12, 200916 yr I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. E-RPM SOFT COM 336-793-0285
August 24, 200916 yr I would like to look in to making a kit were i can get more than 8inches of travel. what the kit might take. 1.Use blocks to lower the sub frame 2.Instead of using blocks for the struts, replace strut with coil springs and shock. Other ideas might include lenthing the control rods to place the hubs outside the car. Welding in a sub frame then use a four link style suspension, to put in solid axles and a t-case.
January 4, 201016 yr HOW MUCH FOR A 4inch lift 84gl wagon, shipped to texas, I WOULD LIKE TO BUILD MY OWN BUT KNOW NOTHING ABOUT LIFTING ONE YET ? 817-999-1763 CALL ANYTIME
January 20, 201016 yr Can you do a 3" for an '81 GL wagon? How much is it going to be? I'm local, so no shipping. Is it bolt in, or is there welding/mod involved, aside from steering length?
April 21, 201015 yr I have a 1980 1600 4wd hatch, how much would you charge for a 2-4 inch lift? Kyle B. Salem, OR
June 2, 201015 yr Author 250 for 2 inch 500 for 3 or 4 havent done a 6 yet but if anyone wants to loan a car and 300 lets get it on Edited June 22, 201015 yr by michael appel
June 2, 201015 yr Author I have some ideas in changing the way subi's get lifted. I'm very intrested in what this might take. E-RPM SOFT COM 336-793-0285 hit me up with your ideas
June 2, 201015 yr Author Can you do a 3" for an '81 GL wagon? How much is it going to be? I'm local, so no shipping. Is it bolt in, or is there welding/mod involved, aside from steering length? bolt on
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now