ThreeEyedBandit

You are probably correct; there is most likely something going down with him and his family I suspect right now because, about two months ago we were talking about stuff and he described this same scenerio happening and not to worry. He would try to keep in contact and if he couldn't just give it time and he would get ahold of us, or he was dead. But he is still around because I have seen his car at work. Next time I see his car there I will swing by to see how things are going and pass along the message. Matt

"It" is coming along, right now I get to drive it everyday to get it broken in but no Turbo yet:(. "It" is also finally running on the Megasquirt but needs a bit more tuning. As always free every weekend after 6:00 on saturday. Matt P.S. Stickers are always good, and the bigger the better.

Thar she blows!!! See above.

Working on it, back in a bit. Matt

Here is a copy from this years Subaru Show of Ken's brat in the pit that subadoom took. Everybody must watch very very super funny:brow: . Here you go *****http://www.rcpics.net/view_single.php?medid=42357 Matt

For Sami T-Cased drive lines just get the donor drive shafts and one extra flange for a subaru diff and, since the crosses are the same either one(you will need six total). If you grab all the above parts you will have everything you need. List of materials in order of use -------------------------------------------------------------------------- For the intermediate shaft- 1-Stock subaru output to transmission 2-Subaru caps and bearings to adapt the subaru output shaft to the Samurai intermediate shaft. 1-Samurai cross 2-Samurai caps and bearings 1-Stock samurai shaft and flange to t-case The front and rear drive shafts are the same just different lengths(2x)- 1-Samurai Flange 2-Samurai Caps and bearings 1-Subaru Cross 1-Subaru Drive shaft with attached u-joints and flange to the differential. -------------------------------------------------------------------------- Now with the completed drive shaft just mount the T-Case and shorten the driveshafts to their proper length.

black, no lugs -mike

I will be there as well as ike and robert, I talked to Ivan today and if he has time will make it there. There betta' be tato-salad mike says. Matt As for the suprise there better be stickers or a tan wagon twisted up on the suburban's hood.

Ok finalized plan, meet at our house at 6123 foley lane at 9:00ish. Then just drive around the hills and get away from everything for awhile. The house is pretty easy to find, but if you need directions give me a call today at work between 10:00 and 6:00 @ 779-9935. Matt

So far the plan is to meet at the new pad(directions to come) at 10:00sh, and head up kane creek to mess around a little. Matt

What are you doing tonight? I am free after work, and thursday. I will give you a call on the wireless later today to find out. Matt

Are you sure that they didnt line up? I know we are running front and rear axles on a diff. and they line up. Maybe the axle was one spline off? The axles should mate with the front or rear diff with no problems. Matt

Sorry wrong Alex, I thought you were Alexc but you are Alexx, now everything make so much sence about the cali emissions. Again sorry for the confusion. Matt

How does a little wheeling trip on sunday the 4th. sound? I am thinking a little get together up on the peak with some casual get away from the valley wheelin'. I know Tony is game for it and is robert and mike, so how does this sound to everybody else? Matt

Are you going to meet everyone tonight? I will be there around 9:30 and will take a look at it if you want, if not you should show up just to join us and have a good time. Matt Also why are you passing cali. smog int oregon? just curious.

We should be at Al's parking lot around 9:00-9:30. Have to get the cars ready and get done with the BBQ. Matt P.S. I talked with the kid in the blue wagon very little, and he seemed kind of wankerish.

Saturday is the big cruise night I hear, mike and I are going to be just down the road sat. at a BBQ watching them. Should be a good time and just get better. Matt

I dont see why not, how does 8:30 in the parking lot sound if we are getting pizza? I know mike and I are going to a BBQ saturday, so maybe later then? Matt

I like the order pizza idea, we should be complete on the stereo part. Since mikes and mine play MP3's and they are plenty loud. So are we going to do it fri. and sat night? I cant really see why not. Matt

Ok, today I talked to the bossman about making sure we could use the parking lot for friday night, and he didnt mind the 'keeping an eye on the parkinglot' aka sitting and watching. But didnt like the idea of the bar-b-que. Said something about have to deal with the city and the downtown planners, so I said ok. So basicaly we need to find a different place to eat, but can sit and watch. Matt

This kind of makes me think that meeting at Adams house might not be a good idea:rolleyes: ? Or maybe its just me. I am thinking just meet somewhere and take over the parking lot at work during the 'cruise' and show thems boys what fun is all about. Matt

http://www.deltacam.com/ Matt

My 82' has the stock 4sp. D/R clutch cable running the 5sp. D/R transmissions clutch and has a goo amount of slop in it. Maybe it is hanging up on something? I know at first I had it routed stupidly and it didnt reach. Matt

How does saturday night sound? I am free after six to do stuff, and saturday works most. What is the new job? Matt

Yes, it has to be mounted between the turbo and the throttle body to work. You could mount it any where else if you want but it will not do andything usefull. Matt