Jibs

The shifter is set up through a go-cart 3 speed shifter.

The Brat should be ready in a week or 2, let me know. If you want to go sooner, I'd be willing to run down there. I get weekends off now too.

A couple of mine:

There's not too many gen 1's. There is a Brat that I might need to grab the tailgate and sidestep from, and I still need those hatch fenders, so I might go back sometime soon. Other than that I DID nab an LSD thats going to ebay. But that was all.

A buddy of mine recently built a buggy using a hona accord motor and 2wd Honda transmission. He flipped bioth the engine and tranny 90 degrees and used the stub shafts in the tranny to drive the driveline. using yota axles with 5.89 gears (I think) he ended up with a crawl ratio of around 60:1 without the need for a t-case. The thing is way light at 2200 pounds too. Here are some pics.

Yeah I'm still in. PnP at 11. See you there.

Ok lets shoot for that then. How about 11 AM? That'll give me time to wake up and get out there.

How about trying to go this coming wednesday? Or this weekend? I don't know when exactly. I can go any day.

does anyone want to hit up the carson city Pick N Pull? I have to go grab a few things I saw there earlier in the week and maybe we could make a small meet out of it?

I have the Transmission and all the needed accessories for it (Conversion kit from Bratsrus1) the driveline and the clutch, and i'm getting it done at my buddy's place called Asian Specialized. I swapped the 5 speed in the first time with help from subieman and thesubarujunkie and it wasn't fun. So now i'm thinkin its easier to have it done at a shop.

Welcome aboard, glad you could join us. Its nice to have a few new faces around. we should all get together soon and make a run somewhere. i gotta get my brat to the shop to have the 5 speed swapped in, should do that at the end of the month when I get my tax return, then I'll be back into a lifted Brat again! Here's a pic of my old rig: My new rig is going to look the same, its just white.

Anyone ever try swapping the 2.2 in without the power steering? I figure I just need a different smaller belt for the alternator. Any ideas of what length it needs to be from experience? Otherwise I'd need an ea82 engine crossmember with power steering right? That way the ej22 motor mount bolts are lined up witrhout any drilling right? I'd also need a 4" steering extension for an ea82 power steering unit? What else? Thanks again. EDIT: Are the engine crossmember lift blocks the same for an ea82 as an ea81 as well?

I'll be taking lots of pics to throw up as Im doing the swap. Does the ea81 Pitch stopper work with the 2.2? Just tryin to figure out what I'm going to be needing from this legacy and what works. Thanks for the help.

I have a few more questions on the swap. Will a third eye still work with a fan on the front of the radiator? Or do I have to scrap it? Also what throttle cable do I use? The legacy cable, ea82, ea81?

You have a project ahead of you. Keep up the good work though and you'll have a sweer\t ride when its all done.

For the subarus or yota's? LOL:lol: Naw thats cool, count me in. Thats a great time to have the show, I think it might be close to the time when people go back to school, but its late enough so that the weather should be great and it gives everyone time to get their stuff together. You can definitely count me in.

4/3 BYB Luift Kit 28" Super Swamper TSL 6 Lug 14x6 Chrome Rims Limited Slip Rear End Tube Doors Before: After:

hey everyone they changed my days off at work to Friday and saturday. So now I have a little better schedule to meet up.

Depends on how tall you go, I have 15x7's on my brat, but have "low-pros" on.

The 5 speed D/R should fit no problem. You will need the conversion kit from Bratsrus1 but its WELL worth the money. A bracket needs to be made and mounted to the underbody for the 2 piece driveline, or get a custom 1 piece made.

This weekend not good for me, not enough time to call in and I have plans already. Maybe next weekend the 27th or 28th?

Here are my drilled hubs: New studs are about 2$ a piece at napa and you need 16. They had to order mine but they came next day.

Any day works as long as I have time to clear it at work. We're slow enough that getting time off is easier. You guys pick and I'm there.

Im off Monday/Tuesday so that pretty much screws me out of anything. I may be able to get a weekend day off though. lets set a day and I'll see if I can manage it.