Scott in Bellingham

Tube It , looks like a wheeler in the makins

mykingcrab got them for me they are retreads from Tire Shed in Seymour Mo. I would get another set if I needed them I dont remember the price but it was cheep

out

It will have a EJ22 I have all the wiring for the fuel inject so I will probably do that, I do not have a extra Weber ,

it may go to Sandlake, we havent set a date yet for Sandlake we may end up going in August or end of July

Hey mom look what followed me home got the main rails cut, this is going to go quick

I really like that brown 2 door

Im running 26" mud tires love them, Ive ran up to 29" on the white wagon and prefer the 26" for the gearing I wouldnt go 30 ( but Jeff would )

OK theres been 11 views who wants to go, it would be nice to have a camera operator along heres the first time out to Walker Valley a few years ago , my driving technique sure has changed since then, no more burnt clutch driving

this is to be a light weight toy, heavier wall means more weight, if designed properly with diaganal bracing there is no need for thick wall heres a Suzuki Swift based buggy I built , the thing is light and will go up any sand hill I aim it at, the tubing is smaller and lighter per foot then what I will be using for the Scoobie roo steel is ordered and will bring home tomarrow

be just fine Ive ran for months in FWD low range no issues

this thing have a diesal in it?

now theres some fender trimmin

made some modifications to this picture, also would like a built in storage rack on the top weather proof with removable doors

Just EJ it

Walker Valley Saturday the 17th near Big lake NE of Mt Vernon, Talked to Jeff and hes up to it with his EA82 Maroon car, I'll have my White EA82 EJ wagon , who else wants to go? you will need a locked rear diff and some mud tires ,bring a extra EA81 axle or 2 should be a fun day always is Scott heres last time out to walker

good looks like another walker valley rig

the frame will be 48" to the outside, the wheels willstick out stock width, will be running 27" swampers with Pug alloys

at least 120 + ' Im going to go with 1-1/2 x 2 - .083 on the bottom frame priced it yesterday its $50 for a 20' stick will be orderin up 100' this week , will go with 1-1/2" .095 round for the top bars, its a go Rod will help me and maybe make one later

Amanda I sent you a PM

More pics for ideas these are called Scamps based in the UK

Larry you want to build one of these?

thanks Zap

heres the layout of the parts this is a EA82 my thoughts are One Doner car for all parts ease of construction full length square bottom rails ( Engine Cross member width ) to build the cage on , this will make it easy to fab up, Square and Rectangular Tubing for the bottom and mid frame round or Square tubing for the top bars square fabrication joints whebever possible to aid in ease of building I want this to be a easy thing to fab up so if we go with square tubing and square cuts it wont take long to build the frame also square tubing costs less then round, I like round for the top for looks and thats were you grab it with your hands , would be neet to have a towbar on it to get to the riding area 2 or 4 seater, 4 seater stock wheelbase, 2 seater same layout but shorter wheelbase, mount radiator above transmision or just higher in front of engine to aid in aproach angle,

heres another for ideas I realy like this one I think this ones the same model