March 11, 200719 yr Hey guys, I just wana see if any of you guys have some custom exhaust pictures from your EAs, I replaced my exhaust gaskets and guess what, the flange is warped so its time for a new header, im going for the 4 Stud flanged, Im going to make it my self with some mild steel, no SS for the first try! I AM SICK AND TIRED Of NO POWER!!! Thanks for the pics if anyone has any!!!
March 12, 200719 yr There's a couple people on here I remember making some good looking custom headers. I've got the TWE headers. http://img.photobucket.com/albums/v473/tizzzle/DSC00584.jpg http://img.photobucket.com/albums/v473/tizzzle/DSC00603.jpg
March 12, 200719 yr I think I have a pic or two of mine in my gallery. Feel free to check it out. Didn't see and headers. A bunch of nice cars, and a shot of a wrx looking flange on an uppipe.
March 12, 200719 yr Author Ok so those flanges that are the 4 stud configuration. Did you Guys make those or buy them?? Im planning on making them. And soon really soon.
March 12, 200719 yr Oh, really? I'll throw some in there, my bad. For the head flanges I had to have those made. My builder used .25" SS stock and to be sure it would not crack or warp, I asked that he make it with four stud holes. All I did on the head side was to pull out the factory exhaust studs and replaced the two per side with four SS studs and hardware, with a used factory gasket under that. When I pull it off to add the EGT bung I will put a new gasket in there, but for now, with four bolts per flange, it is holding up very well! I haven't logged many miles with it, but no flaws so far! PICS: http://www.ultimatesubaru.org/forum/showthread.php?t=55274&highlight=header
March 13, 200719 yr This is my custom exhaust on my old EA81 mountain patrol. Got much better flow and power! It was also about $250. But worth it.
March 13, 200719 yr I don´t have Pics, but I made somethin´ Almost the Same on my EA82, and you´re Right, it Flows Better.
March 13, 200719 yr Author There's a couple people on here I remember making some good looking custom headers. I've got the TWE headers.http://img.photobucket.com/albums/v473/tizzzle/DSC00584.jpg http://img.photobucket.com/albums/v473/tizzzle/DSC00603.jpg Woah woah woah woah woah, do you mean tech works engeneering??? HOW WHERE, I WANT ONE, or at least a perfect copy of one.
March 14, 200719 yr Not sure if they still make those... Call them up Beataru I have all the info of some of the last ones available is the place still has them.
March 14, 200719 yr Author Oh man, Caboob do you know how much they are?/ Probably a million dollars, Like everything else TWE makes, But they are probably so nice.... I wonder if I could make my own that looks like theirs, oh well, I have brakes to make work...
March 14, 200719 yr Oh man, Caboob do you know how much they are?/ Probably a million dollars, Like everything else TWE makes, But they are probably so nice.... I wonder if I could make my own that looks like theirs, oh well, I have brakes to make work... about 500 bucks if I remember right, 200ish for the matching downpipe. I've also got the contact info and if you tell him I sent you to him he might get you a better deal.
March 15, 200719 yr Author This Header is the TWE "Old School" Header right??? and what does that come up with, like what flange? the IHI type or the garret, rest of the world, type.
March 23, 200719 yr This Header is the TWE "Old School" Header right??? and what does that come up with, like what flange? the IHI type or the garret, rest of the world, type. when i called a bit ago, they leave the flange unfinished so that the customer can specify. they'll do anything you want. they only had a few left.
March 24, 200719 yr Author oh ok thanks for the info, my bro in law is welding my header for me just so I can have my little bit o power back for the time being.
June 4, 200817 yr Author http://www.ultimatesubaru.org/forum/showthread.php?t=89213 If someone ever begins production on these believe me you guys wont be left out.
June 5, 200817 yr I modified my headers up-pipe when i put the TF035 on my EA82T I removed the restrictive T join below the turbo side head and fabricated my own From this (1 1"2 inch restrictive crush bent join) To this (looks rough on the outside, but is over 1 7/8" diameter inside all the way up to the turbo) A couple more views including my home made dump pipe TF035 installed
June 5, 200817 yr The header for my dual carb EA81 (bigger manifold plate, wider spacing, then standard EA81) two 1.75" into 2" Sorry, but the image is actually of my custom control arm setup, just so happens to have the exhaust in it.
June 5, 200817 yr Author The header for my dual carb EA81 (bigger manifold plate, wider spacing, then standard EA81) two 1.75" into 2"Image Removed due to crying. Sorry, but the image is actually of my custom control arm setup, just so happens to have the exhaust in it. are you in a pit?
June 8, 200817 yr Yes, my brothers garage has a pit. http://www.ultimatesubaru.org/forum/showthread.php?p=720388#post720388 Pretty sure they are stock on Brumby's over here. Every Brumby I've seen has one or more still on it. I think I was missing one out of the 6 the car has. They work good at protecting the CV boots.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now