August 1, 200718 yr While removing the intake on my 89 XT-6 to test fit some things I discovered this: The trans to firewall mount is not only bent to a 90 degree angle, but the mount itself has been snapped right off the tranny! I have no idea how or when this happened... unless it was that time I lost a bolt out of the tranny crossmember and the tranny fell a little bit... can't recall hitting the tranny on anything... :-/ I'll have to check my spares tomorrow and see if I have another.
August 1, 200718 yr I bet it was due to the pressure from that spring. Wheres BGD when you need him;)
August 1, 200718 yr Hi This is Jerry, i bet it is when your right foot tryed to touch the pistons or should i say it's called horse power baby:grin: Thanks Jerry
August 1, 200718 yr Slow Dragon Poison. It must be reeeeaaal slow. He didnt make it to the Dragon this year:-p
August 1, 200718 yr That is so hot. The replacement part should definately be painted yellow. Good for 25 Hp at his rear wheels:lol: I know his car is fwd...
August 1, 200718 yr Think I would be looking at condition of the front motor mount. Missing bolt from tranny X-member may have caused it, but the front mount should've held engine from pitching that far.... Just my .02
August 1, 200718 yr There always has to be one problem child Check all the mounts. Thats a pretty big bend for a tranny that dropped "a little" . i hear the grand canyon is a little hole in the ground :-p nipper
August 1, 200718 yr Good for 25 Hp at his rear wheels:lol: I know his car is fwd... no, it's good for 30 HP at the center differential in neutral, but only if he has a third generation thermo confibrulator.
August 1, 200718 yr no, it's good for 30 HP at the center differential in neutral, but only if he has a third generation thermo confibrulator. Doesnt that require the muffler bearing upgrade? nipper
August 1, 200718 yr You know Phil...if you would have come to the Dragon Meet..this would have never happened..Cheesewedge is telling you its upset that it couldnt be around more of its own kind...yellow Alcyones!
August 2, 200718 yr Doesnt that require the muffler bearing upgrade? nipper No, but if he doesnt have fresh blinker fluid he just might trash the running light/turn signal journals.
August 2, 200718 yr whoo, last time I saw one that bad, my hoses had ripped of the radiator. That was because of a disagreement between the oil pan and a rock. Done any rollback clutchdumps?
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now