86BRATMAN

I've had my hand stuck to one before. Cleared windshield, wet hand+frosted knob= Shannon Stuck....

That box is held up by the 2 10mm bolts through the bedside isn't it. I Remember seeing it now that I think back to undercoating the insides in my brat

Am I the only one who didn't miss that.

I see both sides of the arguements here with valid points. But there is really no reason to try to desuade somebody from doing what they know and love when it comes to a build. I'm better with computers and handheld tuning devices than I am with carb jets and the internal workings of a distributor. While this isn't a build for the ultimate street monster, thats not the point, if it was then I could see the point in disputing the carb and dizzy on an ej motor. Just my .02 though.

yeah. I'ev got a few beige interior things laying around as well.

lookin good, well better, there. Pull the guage cluster and see if it has an individual light for the srs, if it does just pull the light. I've seen some that socket a bulb and some that have a totally seperate from dash cluster plug.

The 2wd's have the same setup IIRC. Just made 2mm smaller around. I put them together about a month ago and didn't really pay to close of attention. I just knew they worked from reading up on here. Also it is about an 95% chance they have to be oem 2wd axles. ALL the parts stores here list the exact same axle for both 2wd and 4wd. On the 2wd hatch I picked up for parts I got really lucky with the one replacement axle that was actually the correct size. The other was rebooted oem. But it fit like a glove.

3" TBE is 3" Turbo Back Exhaust.

Yeah. The upper of the two lower strut mounts is cam bolt for camber mods.

Sounds very similar to the adjustments on the back of the legacy's and impreza's stuff.

I don't see why the wouldn't last. All you are doing is swapping cups, not the whole joint. As long as you get the retaining ring back in place there shouldn't be any problems as long as the axle is in good shape to begin with.

D19 if I'm following it correctly.

You may see a vid or two from me at a drag strip if I ever get done... Only thing with those wires is that i'll be trying to constantly flash the ecs light at you, if thats what you have the cel wired to, or wired at all.

Sounds good and strong. I can't wait to see some vids of it in action

So I see you were more forthcoming with your information 9 months ago. LOL

Hell Yeah man. Congrats.

How much is the legacy?

Hey, I'm lazy...

I'm not an expert on the ea82 cars. But you should just need the strut and sprin assy's off a non air ride 2wd or 4wd, which ever yours is

What is that dissy off of? Looks like you've got it mounted to where the oil feed on the ej22t heads would plumb in.

I'm in total agreance up until the best motor. It didn't get the ej22t.

I successfully mated ej22 doj cups to 2wd ea81 alxes for my swap. 4wd's won't work. I was going to try the ea82t doj's but didn't want to pay for the axles

Rgyver ran 13.02 In his wrx swapped 83 Brat. With 3"TBE.

Are you kidding me..... Thats great stuff right there man.... 12.99 damn...

Over on Leg Central there was a guy who asked somebody at subaru about it. They couldn't even give him a straight answer. But I guess I'm in the majority either way with the auto:mad: