xbeerd

oh. that i dunno, i just had the sweet hubcaps.

like from newer soobs? they'd fit in.. all the way! the hole in the wheel is huge, like 4" or so.

now if i could just get my hands on a center cap for the whore with the big hole in the middle!

ha! thats great, Tom, i wonder did that box come from you? you are the only resident waukesha SA dude!

pic?

unless he is paying to park in there, then just punch him in the *************** and make him not be a *********************. really. they sensor out 'ch0de'

might be able to work it out with the rubber mallet, have a bodywork block/form on the other side. i think its time to build a wall between that garage space and the other 3 bays.

true, that bikes seen better days. LOL bagged for 2 yrs, then moved to be the person that could work every department but the butcher shop. I was even a store director for 2 days when the guy at another store had to leave because his wife was having a baby. (likely excuse!)

atleast the paint is still solid, man, thats some ************, ************in shhhmouse. did his ************ get ************ed up atleast? LOL. hopefully the dry ice will do the trick, can probably get some free dry ice if you go to the grocery store like pick n save in the mid morning after the frozen food deliverys come in. if i recall. its like M-W-F and maybe saturday deliveries? of course, that was 10-15 yrs ago when i worked in a grocery store man im old. HA..

and i told you that when we were rippin apart my outback as well, its on video i think! LOL.

I saw these on Expedition Portal, car is lookin great!

a long cord would probably be the best option. then you are able to have up to like 1800 watts.

I think it would be minimal... the turntables really dont amplify, nor does the mixer. so the power draw should be pretty low. The turn tables might pull a bit more because of the motors that spin them. If you look at the back of the turn table it should give an amp rating where it says "120v 500mA" etc the 4 channel mixer sitting next to me draws 60 mA, which is nothing. remember P=i*e so, Watts = current draw * input voltage Watts = .06 (60mA) * 120 Watts = 7.2 Technics Sl1210 turn tables draw 14.5watts. my power inverter is like 400 watts, thatd be plenty to power those 3 things. now as far as speaker systems that is where all the power draw is obviously. maybe we can get Dubby Dubs in his jacked up caprice to come along and provide some speakerz.

Definately bring the turn tables to don miller for sure. anyone have a generator. you could spin out the back of the wagon vigilante style until they let you hook up to their system.

maybe the caliper is stuck open? like the guide pins are binding and not allowing it to close?

awesome to hear it runs dude! i gotta get moving on my swap stuff. as far as i can tell the wiring is good on my end. too bad we couldnt swap my harness into your car one day and see what happens! ha!

especially when you turn the key to engage the starter... DOH!:lol::lol:

i drove my father in laws Solara yesterday, when it was running you couldnt even hear the engine or exhaust.. it totally sucked. and it was an auto. it really made me appreciate my old rump roast manual trans wagon. hahaha:banana:

i dont blame them.

you know.. sometimes you dont have the right tool for the job. and you have to improvise. and sometimes you neglect to remove ALL THE ************ING bolts. LOL! atleast its out now, resting on a nice unused spare tire.

Looks great man!

man, makes me wish i put a bigger lift on. however, that would definatly not fit in my garage with my rack on.

haha. i wonder if you could modify the spare tire bar, and just weld in a piece connecting the 2 90 degree bends with some metal stock. or weld in a solid piece the entire height and use a torch and cut someting out of it, like "catch this fox" although that would relenquish the idea of keepin the spare tire in there (where the turbo goes!)

i didnt mean the wiring on the ea2ej diagram completely.. i know its much differnet the sense of smj's etc. i was just refering to the schematic from 12v, fuel pump, ign relay etc. i think i just worded it really dumb. LOL. i have the OO legacy fsm, i'll double check my pinouts the same, but not sure if the ej25 is different, i dont THINK it is. glad to hear its runnin considering whats not plugged in!

haha, thats what i said after he told what he used too! FOx, this is a situation where a car lift would be useful, get the thing up higher for access