July 17, 201114 yr Author We got the Custom down pipe made today thanks to bill (thebeastidrive) it fits like a glove the steering clears perfect is plenty far way from the trans dipstick. sorry about the ************ty pics but i only had my cellphone. It sounds bad rump roast BTW Cheers R.
July 18, 201114 yr nice work. haha I ran mine with dual downpipes pointed straight at the ground for a while ha ha it was nasty. I was afraid of ripping the exhaust off when flying threw the mud pit. Now I have dual catless with dual thrush glass packs sounds good that way.
July 18, 201114 yr You ran dual pipes all the way back, huh? Dayum, does that take up much room? If it were me with a turbo setup, I'd be tempted to just run it up and out of the hood.
July 18, 201114 yr I ran them out the side. they hang off the lift brackets in the back. It is not ideal and does take up a lot of room. but it sounds good. BTW I have ran exhaust out the hood and it is not a good idea. exhaust smell constantly goes into the interior threw the cowl and gases you out. lol
July 18, 201114 yr You are going to want to put a heat sheild between the turbo and that steering joint and also wrap the turbo in a blanket and wrap the down-pipe. Otherwise you will cook that steering joint for sure. Temps near the turbo can easily hit 1600 *F and you will destroy the grease and little rubber seals inside the joint if you don't protect it. GD
July 18, 201114 yr I don't want to clutter up this thread, but I'm trying to send you a PM about that steering part, if you've gotten my payment/shipped yet. But when I go to send you a PM it says "subaruguru has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her." :confused:
July 19, 201114 yr His status is currently banned from the looks of it.... Yeah..... what the heck happened? Kind of an unusual occurance for a 1500+ post count member to get banned isn't it? GD
July 19, 201114 yr It doesnt matter how many post you have or how long you have been here. If you dont heed the warnings and then post something negative towards the mods, then you get to sit in the corner for a while. When he has had time to think about his attitude, I'll unlock this thread.
July 26, 201114 yr Author hey everyone! made a lot of progress on the car while i was gone. I put the blower motor in and A/C delete duct this makes a ton more room, then got the dash in, BMC and pedal box installed, cut out lower core support for legacy rad and fenders on. and Bill's (Thebeastidrive) skech of what it should be after a ton of work. Cheers R. Edited July 26, 201114 yr by subaruguru
August 5, 201114 yr Author update final TO DO List for the brat before the show. Belt< Install Throttle cable< Install Brake lines-3/8"-24 female inverted flair tips 3/16 brake lines. < Buy Install Tie rod ends < Install Front axles < Install Hood scoop < Install Gauges < Install Most will be done this weekend as it just needs to be put together after the major things are done then it's time to test it and button everything up before the show. Cheers R. Edited August 11, 201114 yr by subaruguru
August 11, 201114 yr Author Belt< Install Throttle cable< Install Brake lines-3/8"-24 female inverted flair tips 3/16 brake lines. < Buy Install Tie rod ends < Install Front axles < Install Hood scoop < Install Gauges < Install Cheers R. Quoting myself to save time #WINNING# updated list. Cheers R.
August 12, 201114 yr Author OK SO it took some time but i got the cooling system together and was able to run it for an extended time so here is a short vid of it warmed up sorry it was dark out by the time i was done. http://s194.photobucket.com/albums/z177/subaruguru/?action=view¤t=DSCN6206.mp4 I still have a small vacuum leak but no issue i am going through it tomorrow. Cheers R.
August 12, 201114 yr Wicked cool. Doesn't look like you've got much left til it's drivable. How much longer there, ya think?
August 12, 201114 yr Author i hope to have it move on its own power today all i need to do is put the front axles in then up on the lift to button up everything under it. im using an XT6 FP to keep up the flow rate so i need to swap that in. then just double check all nuts and bolts. Cheers R.
August 12, 201114 yr you may want to look into an aftermarket fuel pump. I dont think the xt6 pump will be enough to feed that thing under boost. If you do go with the xt6 pump. I would put a fuel pressure gauge on it and drive it to make sure fuel pressure stays within spec on WOT while under boost. PS, nice work. keep it up
August 13, 201114 yr How hard would it be to just stick a Walbro 255lph on there? They're only a hundo darra.
August 13, 201114 yr Author IT LIVES!!!! I drove it today just a little because all i have is the ebrake to stop with at the moment. It has great power and torque but the acceleration kinda sucks. my 5 speed legacy is quicker from a stop. So needless to say after the show the 4eat is getting 86ed and a 5 speed in a its place. As for the FP it is working great it should have no problem being as its off a 2.7L and this is only a 2.0 the car already ran fine with the stock 1.8 FI FP in it and i put the XT6 one in today i was amazed at the size difference nearly twice as long as the stocker. Cheers R.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now