ok im going to put in a Boost gauge, as well as a exhaust temp gauge on my A-pillar, and i need to know what pod to use, if i use the universal, or one for a honda or something.

 

Thanks,

Shean

2nd gen CRX. Find one from one of those and it should be a close fit.

2nd gen CRX. Find one from one of those and it should be a close fit.

would that one work for a gen 1 soob as well?

 

-mike

I used an OBX dual pod for an 88-91(gen2) CRX.. it fits ok.. not perfect, but not bad.

A gen 1 Impreza one fits pretty well... thats what got put on corkys 86 GL-10 sedan for his temp guage I know...

 

the dual pod one has a bit different fit because at the bottom it comes straight down for the triangle at the front of the window, but when your door is closed you cant see it.

so i was about readdy to buy a dual or single pillar>>>

 

so.....crx or 1st gen impreza?

I used the Autometer one for the Impreza on my 86 GL-10 Turbo Sedan, it mounts just like it was make for the car.

Andrew has the same one in his turbowagon. He got it from Flowmaster along with the boost gauge. Looks pretty snazzy minus the hole for the second gauge:D

put a clock in the second one!

 

is there a 3 hole that works?, or 4, or more???

Well since the impreza 2 hole fits... there MAY be a 3 hole one that fits.... hey if it doesnt you could always sell it to someone on NASIOC for their impreza