October 29, 200421 yr Oddcomp, I have no Idea what you said, but did see the word "Hodaka" . I recently acquired a "Combat Wobat 125cc". That is an old dirt bike for those who have never heard of them before. I am going to race in "vintage motocross races" with it. Ummmm... look up a few posts, paying attention to the names of posters. See it? Oh wait, just look at my name on this post. Yah, I'm the ORIGINAL Hodaka Rider. 1973 Combat Wombat, baby!
October 29, 200421 yr Hodaka rider do you have an electronic ignition on your bike. If so is it the same as the briggs and straton type?
October 30, 200421 yr Hodaka rider do you have an electronic ignition on your bike. If so is it the same as the briggs and straton type? Hmmm... Points, if I remember right. Haven't actually had to work on it since I replaced a melted piston about 10 years ago. Really fun bike! My dad was the original owner - he was partners in the local dealer for awhile.
August 6, 200619 yr 190 crank...133 at the wheels. 321 crank with 225 at the wheels...assuming the dyno conversion is correct. But, im using the AWD conversion factor....0.7 Stock USDM WRX: 227 crank, and ~160 WHP. There is no "conversion factor" betven Wheel HP and Crank HP. Due to the fact that the losses depends on different thing, some torque, som rpm, som static. So if your dynotester says that he can give you some Crank nubers from the Wheel numbers, its all guesses, and probobly he upp's the number a bit to make you happy, afer all, often you payed him $$$, and you whants result. If you have 133 at the wheels, you have nowhere neer 190 at the crank. If you loose near 60 hp in the tranny, it will need serios cooling. A car whit 225 at the wheels maybe hawe near to 270 at the crank, not more. a 4WD a little bigger losses. //DIRAVI PS: My english is not so good, i hope you understand.
August 6, 200619 yr i read the whole forum a little bit ago thinkin about my 85 gl10 mpfi which has a rod knocking. i been told that my engine is the engine from an xt6. now my question is couldnt i put a turbo from a wrx if i got all the same components listed? or would i need a different cpu as well or more?
August 6, 200619 yr i read the whole forum a little bit ago thinkin about my 85 gl10 mpfi which has a rod knocking. i been told that my engine is the engine from an xt6. now my question is couldnt i put a turbo from a wrx if i got all the same components listed? or would i need a different cpu as well or more? XT6-engines shold be 6 cylinder?
August 6, 200619 yr lol opps i didnt mean to add the 6, sorry. but what it is im wanting to do is pull it out and every thing to go with it and put it in my 83. it knocks, do i have to split the block to fix that rod? sorry kinda off subject
August 6, 200619 yr There is no "conversion factor" betven Wheel HP and Crank HP. Due to the fact that the losses depends on different thing, some torque, som rpm, som static. So if your dynotester says that he can give you some Crank nubers from the Wheel numbers, its all guesses, and probobly he upp's the number a bit to make you happy, afer all, often you payed him $$$, and you whants result. If you have 133 at the wheels, you have nowhere neer 190 at the crank. If you loose near 60 hp in the tranny, it will need serios cooling. A car whit 225 at the wheels maybe hawe near to 270 at the crank, not more. a 4WD a little bigger losses. //DIRAVI PS: My english is not so good, i hope you understand. the correction factor is for the differnce in ambiant temperiture and atmospheric preassure from the known standard used in the claculation. nipper
August 6, 200619 yr lol opps i didnt mean to add the 6, sorry. but what it is im wanting to do is pull it out and every thing to go with it and put it in my 83. it knocks, do i have to split the block to fix that rod? sorry kinda off subject Yes, you have to split the case.
August 7, 200619 yr I was reading page one thru two and thinking... This all seems old... Then I saw the 2004 date on all the posts... it is old So WJM, going for that 300hp? I want to see it!!
August 7, 200619 yr Author Yeah, shooting for a conservative 200/240 at the wheels first. Then...meth injection and 300/300, homefully w/out cams and other extreme mods.
August 7, 200619 yr Yeah, shooting for a conservative 200/240 at the wheels first. Then...meth injection and 300/300, homefully w/out cams and other extreme mods. Holy Crap man! I would love to see that!Pure insanity and I know you can do it!
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now