need to find a source for M12x1.25-130mm bolts, having a hard time finding these bolts anyone have a source?

We have a supplier, called fastenall or something along those lines, and there based out of B-ham so its even close for you.

We have a supplier, called fastenall or something along those lines, and there based out of B-ham so its even close for you.

 

fastenal goes up to 120 mm

http://www.fullermetric.com/products/hex/din961_960-10.9hex_head_cap_screw_fine_thread.html

 

found these guys, let me know I still need some for my Lift.

may want to check here as well...

 

http://www.dmbolt.com/

http://www.fullermetric.com/products/hex/din961_960-10.9hex_head_cap_screw_fine_thread.html

 

found these guys, let me know I still need some for my Lift.

 

this is what they say

 

 

Hi , dont stock 12x1.25x130 we do have 12x1.25x140 here @ $2.50/ea

We have a $100 minimum order in to the US

Thanks ,

XXXXXXXX

Fuller Metric Parts Ltd.

They have a location in Surry BC. Maybe they will sell small vol. if we pickup?

 

 

this is what they say

 

 

 

Hi , dont stock 12x1.25x130 we do have 12x1.25x140 here @ $2.50/ea

We have a $100 minimum order in to the US

Thanks ,

XXXXXXXX

Fuller Metric Parts Ltd.

You want a care package from the metric world Scott?

 

I can fedex them to you if you would like.

Cheers

Matt

tried tacoma screw?

there are a few in the puget sound area.

Shipping just say 10 of those bolts from aus to US will cost at least $25aud in airmail, unless you like waiting three months, and each bolt is like $4aud. I think you'd be better off buying $100 worth...

 

But my math may be wrong.

 

It's hard sourcing those bolts where I live even...

looks like 140mm will work too

Metric *anything* is hard here - try finding metric drill bits! Or a metric pin punch. The axle pins are 6mm, but we all use 3/16" because literally no one can source a 6mm punch in the states. Have to get a lathe and make my own :-\

 

GD

this is what they say

 

 

Hi , dont stock 12x1.25x130 we do have 12x1.25x140 here @ $2.50/ea

We have a $100 minimum order in to the US

Thanks ,

XXXXXXXX

Fuller Metric Parts Ltd.

 

I need some bolts too. if it's not too much trouble are you willing to do a group buy to get to the $100.00 mark. AFAIK there are 14 bolts that are needed?

 

BW

I need some bolts too. if it's not too much trouble are you willing to do a group buy to get to the $100.00 mark. AFAIK there are 14 bolts that are needed?

 

BW

 

I got a box of 50 on the way your welcome to some Scott

If I remember right I'm pretty sure parkrose hardware carried bolts that size... they also have plenty of metric drill bits last I checked. They are a pretty large hardware store. The only thing weird about their bolts and nuts are the heads are either SAE or 1-2mm larger than any other bolt of the same size.

or 1-2mm larger than any other bolt of the same size.

That's quite commen. It seems the car companies use smaller head bolts. And you'll find a 12x1.25 on the car may be 17mm hex head, but the new bolt is a 18mm hex head. Just gotta get used to using more sockets. Just as long as you keep those 13mm bolts and nuts off the car I will be happy.