()__1337_CRAYOLA__()>

who do i go through to get one for the run in december?

you can buy that tire paint and paint the letters... thats if they still sell that stuff

:slobber:how dare you tease us with what appearse to be a showroom condition brat!!!

skinny fingers i dont, long pliers i do very long pliers

YOU ALL LIE...j/k:popcorn: i did it with the intake on in 15 minutes.... granted thats alot for a little hose but i did it

alright on my ea82T theres a 1/4 inch heater hose the goes from the t-stat housing to the bottom of the manifold... do i have to pull the manifold to fix this or how would you do it... it looks to have a spring clip on it but i am unsure because i had to use a mirror to see it leak

you know there is a trailer light harness in the back trunk area... but it doesnt look to be completely wired ....

i can fully advance or retard the timming and it still wont go under 1100 rpm with the idle screw all the way in... and now it is leaking coolant from somewhere in the center of the engine compartment.... i hate this car....

i have the screw on the back of the TB turned all the way in and it still idles at 2k!!! help

i poked the float and it still is lit up.... and i tried pulling the pedal... all my brake lights work so im just a little confused unless it knows something i dont... im gonna set the car on fire soon:Flame:

i mean the dummy light on the dash that tells u when a light goes out i think...

my stop light is on solid all my lights are working what would make it stay on... brake fluid is topped off as well.... 1985 gl-10 wagon (now running great thanks turbone for the injectors)

ej swap? did u gut both cats if it was equiped with 2? do a compression test see if you have a dead cylinder... does it miss or anything.. although i guess a dead cylinder wouldnt really do this...

its a 1983

is there any where i can find one i lost the person who had one when they got rid of our play ground haha... checked with arrons he hasnt had a older soob in a while am i SOL? id like to get the whole thing with key but it sounds like i have to use the screw driver

how much for front and rears for a brat!!!

where did you put the valve though... off the MS do i put it on the front or back line... i want to do it right so if someone else gets in the brat and pannics it wont bring them around and cause problems... i have a empi aftermarket valve

can i clear 29" tires on my brat with a 4 inch lift without trimming the fenders?

anyone make these maybe tube or box steel bumpers for brats...

anyone know??!!?!?!?!

where do i put it on my brat the front or the back line on the Master Cylinder Or where for my disk break convertion??????

what kind of shifter mod is there and do you really have to pound the strut tower area out to make it fit? PS ive been trying all day today to get a kit but paypal wont let me complete the transaction WHAT DO I DO!!!! i really want this kit!..... and it has to be the last minute befor i ask that question....

well the 30th is my birthday and ill have some money to burn.... so the day of the 30th its still in effect right?

can i still get the lift for 350 or is this over