bratman18

True. But this falls into the inappropriate use category. If the adult was irresponsible enough to leave the firearm unattended, then that was inappropriate.

Guns Don't kill people, It takes a person using the gun in an inappropriate way, to kill a person. It's sad that people do things like this.

That sucks man! This must be the other project that is keeping him busy! Hope you get it all worked out. I'm sure it'll be great when it's done. I can't wait for mine!

http://jalopnik.com/subaru-brz/

The lip? Yeah it's an Importology lip molded onto the stock bumper. This car has sadly been sold. I will miss it A LOT, but it has a good home in New Mexico now. And I'm waiting patiently for my "new" car to be finished and shipped to me!!

You stated you wanted a test pipe, a test pipe has no cat. They also sell high flow cats that look like the same thing. As for the 02 sensor, the bung is there, if you don't have an 02 sensor in that location on your car, then you use one of the supplied plugs to screw in the bung and seal the hole.

Just curious, what's the best way to email delta cam? I sent a pm a long while back and never heard back.

^I've seen those things drag their belly through places you'd never imagine!

This should fit. I know it says 98-05, but I'm pretty sure the 96 will have the same style exhaust. http://www.rs25.com/forums/f14/t182182-tsudo-98-05-subaru-impreza-resonated-test-pipe-149-shipped.html

Nice! Looking forward to pics. Bill makes an awesome lift! Very well built.

I bought an 86 GL-10 turbo sedan once that was terribly rusted. It had rear discs, and LSD rear diff, and had those seats as well. Wish I had been able to get a few more parts off it.

Well it did bypass the swear filter, so I can see why they edited it, because again, it is a family friendly forum. You don't have to censor yourself, just spell out any swear word you want, and the forum will automatically censor it for you! Gotta love technology! It's unfortunate that you aren't going to update your post because of this.

Love the build, and what you do, but this is a family oriented forum, with people of all ages, so the admins and mods ask that it be kept friendly for people of all ages, that's all.

I am not denying that it's lifted more. What I am trying to say, and what others say as well, is that the springs probably on make the car sit about 1/4" higher than it did when BRAND NEW. The stock springs wear out over time and sag, so when you install the standard height King Springs, it ends up lifting it an inch or maybe even a tad more than it sat before, but not that much over what the car originally was. The King lift springs are meat to lift, the standard height is meant to restore the original ground clearance the car had from the factory. And yes, Paul has been helpful so far!

Thank you! Looks like they have a decent selection. Although the KYB part number, shows up as a Europe only number, and shipping is from GB still, but cheaper than on ebay!

Great pictures! And congrats on getting married too. That river looks like a ton of fun!

The new KYB part numbers are: 341216 is the part number for the rear Loyale struts they offer. And 233023 is for the left front. And 233022 is for the right front. But as said before, none of these are 4WD specific. Sounds like the rear will be fine, but I don't want to lose height in the front. So not sure what I will do there.

He puts it in a flat rate box, so it's about $15-$20

From what I have read, and been told, the standard height may give around 1/4" of lift until they break in. It's common to have the illusion of an inch of lift, but it's actually because you are used to the worn out/tired original springs that were on your car. But again, that's just what I have read, and been told. I plan on towing a snowmobile trailer from time to time, and don't want the rear end to sag to much, so if I have good struts, with at least rear King springs, I should be good.

Yeah the 85 and 86 EA82 came with adjustable rear struts. I am honestly completely fine with buying new Loyale rear struts, as long as they don't sit lower than stock. But from what you just said, yours actually made them sit a bit higher, which is ok with me.

Thanks for the responses guys! Ok, so I wonder if the ones from Subaru, really are the adjustable ones? I was not aware they still made them. I did punch that KYB part number in ebay, and they have them for sale in Great Britain, but will ship here, but they are a bit pricey, and shipping alone is $88. I will have to check out the ones from Subaru!

Ok so I still have about the same answer. I still don't know if I will get the right parts when I order. Like I said, they don't list them as separate part numbers, so maybe they have combined them into the same strut, somewhere in between heights, but I'd really hate to lose height with a replacement strut.

Are the fronts the same between the 2? I have found 4WD rear Monroe and Gabriel struts, but no specific KYB.

I see that. If I go with non Subaru rear springs, it will be the standard height King springs. I don't really want to lose the 2" of travel either. I just want to make sure that if I buy rear Subaru struts, that they are 4wd specific, and not the 2wd with the lower spring perch.