TheSubaruJunkie

I can be there by 5pm Hehe Other than that i dunno if I can go. I'll talk to some co-workers, sundays are our slowest days and I can probably switch with someone. -Brian

I cleaned up my battery terminals today. Removed all the grounds and took my dremel and a wire-wheel to every contact. I also re-grounded my windshield wiper motor, and now the wipers work 4x better and my intermittent works again -Brian

Thanks Sideways. THe 4 plugs i pulled looked like things inside the engine are running lean When I do my oil change, i will regap them to .030 and try that. -Brian

We'll see. -Brian

NGK.com sais they're the same. Gap too at 0.044" -Brian

How about at least a gap for the EA82T? -Brian

are they the same? The auto store didnt have anything listed for NGK's on the RX, so I had him look up an '84 GL and got a set of plugs. Im sure the gap isnt the same... so if someone can tell me what to gap them to. I hope the thread pitch is the same for the plugs. -Brian

I need more footage to fill the entire song. The song is almost 7minutes long. Ive never taken a class on this. Its all come natural. Windows Movie Maker makes it pretty easy to accomplish tasks like this. Ive used alot of other movie editing programs, and this is by far the easiest. -Brian

No IC yet. Thanks Russ. -Brian

http://usmb.net/albums/albuo73/Subaru_Tool.wmv Was playing around. Finally got the music to work. Also found out how to resize clips. Would have done more, but ran out of clips. Cant find the video from WCSS -Brian

Im good for wednesday's... but not this wednesday. -Brian

So far yours are better Jibs. More sound Everytime I try to add music, the program crash's -Brian

Thats what I'm affraid of. So when I check it, since I know what is stock (thanks Caleb) I will just set it to stock. Then maybe bump it up 2 or 4 degree's to compare. This is all for a EA82T, MPFI. I hadn't even thought of the knock sensor, I'm glad you brought that up. I can see this isnt like tuning my EA81 The EA81 runs best at like 10-12 degree's even tho stock is 7-8. -Brian

I oughta do that. Wonder if it would make my DIFF LOCK light stop flickering when its off. -Brian

Most of this footage was taken with Austins Digital Camcorder. I believe he's behind the camera as well. -Brian

How difficult is it to replace these bushings? If you can, get a price for a complete set for my RX. -Brian

Yeah, dont know why but after uploading it twice via the gallery, it wont work. Im using FTP and its going on the USMB.net server as we speak. -Brian --EDIT-- Its fixed now... URL is: http://www.usmb.net/movies/Eric-Ken-ReitersPit.wmv

Kinda piggyback from my other video thread. This is some of the same footage, but its Eric & Ken. http://www.usmb.net/movies/Eric-Ken-ReitersPit.wmv Its roughly 20megs. Use Windows Media Player and it oughta work. Ken & Austin's footage is next. -Brian

Im going to have to cut ALOT from Bob's run Eric you, being the 1st, took a LONG time. Rob, yes I got footage of you flooring it through there too. Subie94: Me and Jibs are working on putting together a film. We'll have to go get some fresh new footage, but thats the reason im digitizing all my video i have (again)... to prep it for the video. Eric, winXP comes with a program called "movie Maker". Its what im using and its very simple to put together video with the transitional effects. Im working on titles and stuff but its really not that advanced. More to come... -Brian

With a turbocharged car it shouldnt be effected much. I think i'll go bump my current timing up 2 degree's and try it then keep bumping until it pings. -Brian

Was going to do a tune-up on my RX real soon. What are you performance guys using for the ignition timing? Im not sure what stock timing is, but trying to get alittle more power out of the RX the cheap and easy way. -Brian

Its broke :\ Too bad its sunday cause the yards are closed. Another pump shouldnt be too expensive. -Brian

NIIIIIICE! Prices are very good. I want one of each -Brian

Hey there.. Travis AFB, isnt that here in Northern California? -Brian

I have footage of the rest of the HP going through that as well. If Eric and Ken give me permission, maybe I'll rip them and put them up as well. Ken, without your spotting that day... im sure I would have punctured my oil pan. Was stupid of me to travel without it, but yes.... a lesson learned -Brian