Everything posted by subaruguru
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
the Rad is gong in the bed with a ducting setup and copper pipe running along the frame rails under the car. It will be a nice setup cheers R.
-
BRAT Meet 2011 Planning
i will be there the brat wont be done but i will hang out anyways.
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
I think i am seeing a connection here subaru lovers like motorcycles as well i know turbone had a bike ratty2austin has a bike i have a bike you seem to have two bikes lol hmmm> Cheers R.
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
As much as i hate to see a subi go to the crusher this one has lived its life to the end of the line and a good sum of its parts will be on the road both here in the us and in Europe thanks to a few members on here. her last moments where noble as she fought back but in the end she made it on the truck. May you rest in peace XT6. Cheers :-\ R
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
Getting geared up to pull the sub frames of the brat and roll the XT6 sub frames under. after paint though pics will be posted. cheers R
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
pics of the tare down XT6 lovers look away. 4000 lb engine hoist VS XT6 challenge accepted o_o Pulling a few parts that where requested then its off to the big yard in the sky for this one but its parts will live on... Cheers R.
-
Stellaaaaaaaa!!!!!!!!NEW PICS!!!!
hey that scooter has a robin engine right? XD Cheers -R
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
This was LJ and I picking it up yesterday i was in my legacy lj was steering the xt6 after removing the rear driveline because it was not fully bolted up and replaceing a camber bolt that was missing we towed this baby 28 miles or so. pulling the running gear for my brat i will be replacing the air struts with std,. struts and using all the 5 lug parts to swap it over this week =) we are stripping it today and tomorow so if anyone has any parts other than engine drive tran running gear parts that they need/want let us know prices are cheap parts in ok shape grey inside. good doors and fenders hood and trunk , uncracked tail lights, ect. thanks Rob.
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
5 lug parts exited >< this guy he he he
-
Stellaaaaaaaa!!!!!!!!NEW PICS!!!!
sweet whats this like mostaru 5 or so jk keep us posted. Cheers R.
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
Haha thanks I really hope everyone gets to see it at the show if it goes as planned i think it will be a head turner and i am proud to say she will be sporting XT6 non air struts and full five lug swap exited this guy Thanks Rob.
-
So Really, how many started a ej swap and never finished it
Did my fwd auto 4x4 5 sp swap and ej swap in about 6 months thanks to all the help here on the boad.
-
Mark Your Calendars, Dig Out Your Camping Gear, and Prepare for WCSS 13!!
It's a pretty bit**en mud pit too if you can get it wet enough. Rob.
-
Stolen Rig (JEEP) MT Vernon WA
sad deal hope they didnt come to this side of the mtns. ill keep my eye out. Rob. And who ever did it better prey the pirate 4x4 guys don't find them first
-
swapping ea71 to ej engine:
The adapter plate wont work for the EJ motor the bellhousing is different than the ea style motors. Rob.
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
figured out how i'm going to run the radiator i think it will work really well and not take away from the look of it... lol plans for paint are dark grey with black bumpers.
-
Let's see everyones OFF ROAD light set-up
mine Thanks Rob.
-
Mark Your Calendars, Dig Out Your Camping Gear, and Prepare for WCSS 13!!
why the subaru show is an excuse.
-
Mark Your Calendars, Dig Out Your Camping Gear, and Prepare for WCSS 13!!
I would be willing to help her load you up haha:lol:
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
well guys here are some teaser pics LJ and i dropped it in to mock it up a little bit, let me tell you it is going to be super tight but no doubt it is going to be one hell of a ride when its finished i started a new job 3 weeks ago and things are going great! So i plan to bring this one to WCSS13. Enjoy more to come, rob
-
Mark Your Calendars, Dig Out Your Camping Gear, and Prepare for WCSS 13!!
WOOHOOO!!!! cant wait it will be my 5th show in a row Rob.
-
EJ20H swapped Gen3 Brat build Continues Tear down time.
Hey everyone the Gen 3 brat is back at my place and with my new job i hope to get it road worthy before wcss13 with the 3.3 a nice set of mags i picked up 3.7 S/R EJ turbo trans (home bult) LSD rear and some body and paint work. here she sets now right out front of my house haha. DON'T CHANGE THAT DIAL! Rob.
-
flood-snorkal=hydrolock
subaruguru replied to subaruguru's topic in 1990 to Present Legacy, Impreza, Outback, Forester, Baja, WRX&WrxSTI, SVXi certanly do respect anyone willing to stop and help when im stuck on the side of the road i have towed my share of people even gave a guy a tire once. Rob.
-
how clean is your engine bay? post your pics
when i was almost done with ym 2.2 coupe swap.
-
No spark on one side of coil pack
subaruguru replied to murphywd's topic in 1990 to Present Legacy, Impreza, Outback, Forester, Baja, WRX&WrxSTI, SVXThe crank angle sensor runs the spark the cam sensor runs the fuel i agree with heartless check the plug wires i know its a stupid simple fix but about a month ago my friends impreza was missing on 1 and 3 tried everything then put plug wires from a junk motor on it and it ran great. My second guess is something that happend to me is one of the tabs on the crank sprocket for the spark got busted off i assume a rock got thrown up into it (no covers). hope that helps Rob.
