Scott in Bellingham

Bruce good to see you here

Post up your offroader in the Wild lets see what ya got , kind of a whos who for offroading Subarus, post 3 pictures Max , all posts must be off the pavement , show us your present wheeler and one from the past if you had one, also a discription of your Mods , thank You . Scott heres mine, 87 GL EJ 2.2 Weberizer 8000 lb Ramsey Winch 27" SSRs Pug Alloys 16" bobbed rear Welded rear diff 3-1/2 SJR Alloy prototype lift and my first wheeler 88 GL 1.8 SPFI 6" Alloy SJR Prototype Lift 215/75-15 Snow Tires on Toyota rims

Rancho pt # RS5241

is that body plastic or fiberglass?

I would like to hit Reiter in 2 mos like we did last year, find some snow to play in Scott

on a EA81 I would drop all points evenly on a EA82 you can go 2" over stock on the front and 1" on the rear

if theres interest I could make a mold and some new bodies off a good body

Greg In the pictures you sent looks like you set the rear diff at 3" , I suggest you place it at 4" , may help the axle issue

if I could get my Nephews crew together it will be fixed, if not I may need to break in the blue EJ Sedan:popcorn:

Note to self: " dont ram vital Drivetrain componants against solid concrete structures"

thanks Jeff for posting, I would like a disc please , it was another great day and Im home with no reverse

got the 8000lb winch all hooked up plan on using it , bringing my bro Bruce and nephew see ya at Joes at 9 , will be meeting at sunset and Orleans at 8:15 at the rockry same place as befor Rob if you want to meet

got the car will check all the numbs thanks guys

looking at a 96 legacy outback wagon its a 5 speed and the 4th gear isnt there , I may get the car, my ? is whats the diff is it a 3.9, 4.11 or a 4.44 ?? I have a 91 gen 1 tranny wondering if it would work in there

OK lets open this can of worms again

Ok I found a stock Tacoma rearend from a v-6 , what gear ratio is it ?? would it be 4.11 ?? also I Have a older style toyota rearend which is narrower , will the "punkin" from the taco fit into the older housing ??

Cool I will be there , hey where did you get chads car??

Figured I would post a picture

I sell these

new outlook on this project heres the new list Legacy EJ running gear 5 bolt LSD up front Welded rear diff EJ2.2 adapted to Dual/Range tranny Nissan divorced transfercase 31" Mudders I almost have all the details finished on the EJ lift so looks like Ill get back on this , wish my pictures were back

the struts are the limiting factor on the tire size

shifter may hit the body sheet metal , yes you will need to bash the inner fender well, yes paypal does that sometimes, not sure why, I sent you a email to fix that,

you could use any EJ tranny and weld up the center diff wouldnt have as low a gear , the EA tranny is used cause it all bolts up

just say the word Ill build you one