FirstSubaruGLwagon

Yeah thats a grat deal! you could take the trany and engine out and part out the rest one ebay and make all your money back and some to boot

Did you use the Jedi mind trick? "You don't need the Subaru anymore........... You want to give it to me........." "yes indeed powerful you have become ,, but you are not a Jedi yet"

neet site: http://www.gotpropane.com/ heres another link: http://www.propanecarbs.com

I'm a bit confused,, as is normal,,, anyway, every website I have went to say repetedly that LPG for use in auto's is not the same as propaine used in gas grills and buffers and such. ???? also,, I saw a website that sells a spare tire shaped propain taink that fits in the pare tire storage area, I wounder if that would be safe in the engine compartment of a subaru???

subaru credit card?

Thats pretty cool... I just found out I have been using a nissan key to start my subee:rolleyes: . Probably could stick a house key in it and start it!

Sorry for my poor use of wording, i ment the actual tie rod sence the ball joint is included is part of the rod. I'm really bad at using the wrong terms to discribe things, but thats just my NC education

heres one site with some info on it. http://www.autogas-india.com/conv.html but im having a hard time finding LPG autogas providers here in NC USA. turns out LPG autogass is not the same as LP

You guys know of any web pages discribing and illustrating the conversion process? Thanks, Dave

good question,,:-\ I was thinking the "slop" or losenes in the steering linkage was due to the inner tie rod ends,, the outer rod ends checked out fine. Maybe I should consider a completely rebuilt rack. I can get one for $195 http://www.carsteering.com

NC.s not completely backwards,, we may have the 2nd worst education system,, but i was able to find a place specializing in subaru parts! http://www.halspartsandservice.com/ ":drunk:YEH HAW! Hunny, get the kids out of the pig pin and clean the beer cans out of the truck were goin part huntin !!!"

thank you for the sugestions. Crawled up under the subee today,, thanks to an almost completely gone rod boot, I could see wich one it was. This for an 85/86 GL wagon with manual steering. Thanks to all for their input:)

Ok, so im looking for tie rods for my 86 wagon... However the vender is showing two kinds of tie rods for the same application. Any sugestions,,, besides removing my old ones first? and

your right, its silver, but a gold sti would look neet;)

sorry, slow browser hit submit twice:rolleyes:

this photo by Andrew Harvey shows that he is an experianced photographer,, he used a telephoto lens with a fast/wide apature to frerze the shot while limiting the depth of field( blurry bush in front) And he made good use of a polarising filter in order to take the glare off the windshield,,,, in other words..... Great picture!!

yep, here the road and track link> http://www.roadandtrack.com/article.asp?section_id=7&article_id=2489&page_number=13 well the car is Gold colored so I would imagin it look like more mud there then there actualy is. but it does make a funny pic

just make sure you put them on all 4 wheels. important to keep the tire diamiters the same in order not to mess up the 4wd durring street use.

WOW that would be a scary ride! I WANT IT!

thats the KEY,,, If you get a guy who really knows his stuff, then things seem to work out better,, however ,, if you get some guy who is just there for the Job,,, then ,, your going to have problems,, I have experianced the same sort of crap from AdvanceAuto

I have a lose knock in my front end,. I thought it was the struts so i replaced them,,, no effect,,,,,bearings, OK,,,,, ball joints, OK,,, turns out it is the inner tie rod joints on the steering rack.

HUMMM,,,, How about an subaru Horizontaly Opposed Diesel,,,, that would be cool! call it the Subaru H.O.D. just imagin the gass milage!

they don't alow that in North Carolina anymore:( insurance reasons

If in doubt,,,, take one of your "nuts" to the auto parts store and buy 4 sets of shinny new mag nuts.. then you will have new "nuts" and the girls will love you... :-p

How are the fins on the radiator??? An A/C tech here told me once that the slightest mash on the fins affects the radiators efficiancy