Search the Community
Showing results for tags '1984'.
-
After over a year of living without a car in Los Angeles, I finally decided it was time to take the plunge. I still plan on bike-commuting as much as possible, but it will be nice to have a car for getting a bit further afield. I've always had a soft spot for Subarus, and after some ambling around on Craigslist, wound up with an oldie but goody: a 1984 GL hatchback. I wasn't particularly looking for a "classic," but this car was just in too-impeccable condition to pass up. It's only had two owners, and the second has only owned it for the past year. And only 137k miles! I took it to a very good local mechanic for an inspection and they were blown away by how good it's condition is. Despite all that, I admit I'm having a bit of buyer's-anxiety - I'm not terribly mechanically-inclined, and this is my only vehicle. She's definitely a beauty, though!
-
So i just bought a new gl wagon because i was given a price i could not refuse for a car that was worth double if not triple what i paid. The only issue i have with it is that it does not have 4wd which is a total bummer. Is there any way to convert this beast of a car to 4wd? im planning on lifting it already so the clearance shouldn't be an issue but please correct me if i'm wrong
-
I have an exhaust problem with my 1984 GL wagon. http://smg.photobucket.com/user/weimadog/media/IMG_1068_zpsf20d217a.mp4.html The video explains the problem. I found it by connecting a shop vac to the exhaust pipe, and listening for the hiss. That's a lot more pleasant than getting under a car and dealing with a hot exhaust. One bold is rusted in place, the other one is still springy. What's the solution for this one?
-
I just bought a 4-Door 1984 GL Wagon with 164,xxx thousand miles. it runs and drives well, save for the lack of rear differential mount bushings making a racket in the rear end, the engine surging because the distributor is very sloppy, and the oil dripping from the power steering pump. The power steering pump seems to be leaking between it and the reservoir, so I believe I should be able to take it apart and re-seal it, correct? The distributor just needs to be replaced. The bushings I cannot locate for the life of me so I am looking for suggestions on where to get them or if I should make them. The owner I bought it from had just replaced the shocks and struts all the way around, the starter, got new tires, new seats, rebuilt the tranny, and replaced all seals and gaskets for the engine. This is the first Subaru I've owned, and auto parts stores don't seem to have the parts I need to replace, so where do you guys suggest I look? And what else, if anything, should I look into on this car that could be a problem in the future? Thanks for any feedback.
-
i have a 1984 ea81 Brat with a 5 speed D/R transmission swap (removal of 4speed auto). the CV axles are going out which axles should i purchases? EA81 or EA82? The Subframe is original EA81, but the transmission is EA82.
-
The Car: 1984 Subaru Brat EA81 Turbo - 5 speed D/R swap (3" body lift, increased tire size) ........................................................................... The issue: 1984 5-speed D/R Transmission has a small amount of play (side to side, up down movement) on both of the front splined-stubbed output shafts. on both (passenger and driver) sides of the Transmission. there is a noticable difference between the amount of lateral movement experienced in the front stub shafts (transmission) and the rear stub shafts (rear-differential). ...... i recently put in both new (not remanufactured) front CV-axle shafts, from O'reillys. (yes ive read all of your posts' about the low quality since acquisition). the axles went 200 miles and developed a significant amount of slop; to the point where i do not feel comfortable driving it. the inner CV axles (inner boot) on both front shafts are now quite sloppy. I popped out the pin and removed the Half shafts from the transmission splines (stub shaft) and found them to have some lateral (side to side) movement. I then compared this to a spare rear-differential i had in the shop and found the the transmission to have a noticable amount more slop than the rear-differential. ........................................................................... The Question: what is the correlation between the amount of slop on the stub shafts and its effect on the CV axles? vice versa? is it possible (or necessary) to tighten the stub shaft and remove the play? does an incorrect alignment increase the failure rate of CV axles? How can i get more life out of my half shafts? any other question and useful information on this topic?
