March 27, 200917 yr Welcome to the new Shop Talk forum. a place to discuss the tools, tips, and tricks used in you shop..... Got a question on a welder? ask it here. wonder what folks carry in their junkyard tool bag? ask it here.... you get the point! enjoy! P.S. If you are having car issues, please post in the appropriate forum
March 27, 200917 yr This is just what a lot of us were looking for! Thanks McBrat and the rest of the Staff!!! Hope it works out as well as I suspect it will. Twitch(ing with joy)
March 27, 200917 yr YAY!!! jy bag = moblie mechanic bag = roadside repair bag = most commonly needed tools I also have many tech tips
April 5, 200916 yr I've seen that pic many times before. But it's the first time that I noticed the welder, then the fact that he's weling beside the fuel tank it appears.
August 17, 200916 yr I think its time to bump this up, the shop-talk forum is NOT THE PLACE FOR VEHICLE-SPECIFIC REPAIR QUESTIONS/PROBLEMS. Its for talking shop, tools, general mechanics, home made gadgetry, etc. If you have a problem with a Legacy/Impreza, post in in NEW GEN FORUM. If its a Loyal/GL/DL/Brat, etc. post it in OLD GEN FORUM. You get the picture. Thank you! -Bill
August 18, 200916 yr To add to Bill's comment above, I think it's time to require moderator approval in this forum, due to the plethora of misplaced posts. Similar to the offtopic forum. Could make it easier on those who have to move the two or three a day that get posted here. Just my two pennies.
August 19, 200916 yr Author did a little bit of re-orging to help people get the posts in the right forums....
August 19, 200916 yr To add to Bill's comment above, I think it's time to require moderator approval in this forum, due to the plethora of misplaced posts. Similar to the offtopic forum. Could make it easier on those who have to move the two or three a day that get posted here. Just my two pennies. +1 I agree. "Would you say I have a Plethora? eh, yea. I'd say you have a Plethora... So please, tell me, what is a Plethora? You say I have a Plethora and you don't know what it means!" Sorry, was a line from the Steve Martin, Chevy Chase movie "The three amigos" Lol -Tom
July 12, 201015 yr My question is How to coordinate to loan for maximum assist? More specific; I like many, have made tools in order to do a job I may not revisit for years. Because I did the job correct and the tool worked well enough. I know that "making the right tool" often takes as long as the job. So is there any thought to how tools would be sent to say someone who really just wants to get the job done and send them off to somebody else? I'm talking about a long tool which fits nicely inside the eng compartment across the unistructure to hold the crank pulley center. Another more crude, a yoke type spanner to grip and hold the timing sprocket spokes.
October 7, 201015 yr If this place helps with the subaru problem i just put in i will be here all the time
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now