WJM

the overbore is directly whats listed in the EPC.

12033AA000 that fits ALL EA82 engines, turbo or not. and thats the STD bore. there are 9 sets left in the country....I cant get them for USMB for ~$180. Complete set. 010 is the .25 over, and none in country, ~180 on those as well....can get from JAPAN. 020 is .5 over, 11 in atlanta... ~$121 usmb cost.

I miss it!!! The RX just does not have the cargo capacity and versatility of the wagon....and the shape of the wagon....mmmmmmmm....good!! The wagon WILL rise again!

me....thats IF and WHEN I do eventually get it.

EA82 springs wont make a difference in height...get one of those elcheapo coilover kits for a honda off ebay...those are like $20 and worht it. You can install those front and rear and adjust height to whatever you want really. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7941754538&category=33582 Id buy that if I didnt already have springs and struts installed....and my new rear springs have arrived.

you have to take the cam cases off...its real pain the in @$$ fora first timer with the engine in the car....if youve done it a few times, like me, its rather easy. Just ahve to get all the stuff out the way...airbox, batt, wires/cables....and then be patient and take your time.

Yep, thats it...original post edited....what you see is what you get.

whats the mean exactly?

the WRX stuff WILL fit and work. I have NOT tested the holding power of any of it. Better be safe and go with the clutchnet stuff. If the price is right I will be getting a 3 puck SPT WRX clutch (the dealer performance stuff thats outragious in $...but I get it for ALOT cheaper... ).

The only help is to have MORE subies!!!!

paypal.com.....?

Depending on if I run SM or STS...I'll get some head studs.

I know, but I cant.

*sigh* peaco it is then.

and how much for the paeco ones?

Here are the South Eastern Events... TarHeel Sports Car Club has a sched for autox and rallyx, but not on site: http://www.thscc.com/ and autox for THSCC: Highlands is still TBA.... http://www.highlandssportscarclub.com/ And Triad is still TBA... http://auto-x.com/ Thats all!

I'll check on that....but tomorrow...as I dont have the EPC with me 24/7.... :-p

There are EIGHT (8) avalible at folgers right now. 31.99+shipping....usually come out to less than $37 shipped via UPS. Give them a call, PN is "EA82OCA" 1-704-536-9635, ask for parts department.

Falken's got a new Azenis sport...comes in 225/50/15. http://www.vulcantire.com/azenis_rt615_t.htm Obviously, I cant run the RX in STS...it fits in STX if its prepared for STS...STS is the 'Street Touring' class in SCCA Solo2. STS is for NA cars...AWD, RWD, FWD...ansuch...suspension mods allowed...brakes use stock hardware...no engine mods...intake and exhaust is free as long as stock cats are used...and so on. Street tires to be used, treadwear of 140 and higher...aka no R compunds. max tire size is 225 and there is a rim size limit. STX is for turbo cars and brakes are mostly unlimited, cats are unlimited i think...and rims/tires unlimited i think. STU is for STi's and other really high end cars. So...an 85/86 DL sedan 5spd is the lighest EA82 suby. So I might forgo the expensive SM/SOLO1 build on the RX and go for STS and similar classed SOLO1 build if I can find the right car.... HAS to be FT4WD NA car...or a 2WD SPFI car...sedan wagon or coupe...5spd ofcourse.

I see........

SO where exactly to i get these stock appearing 300 cc ones...or the 450 redone ones? 300 ZX turbo car....what years?

10mm, 12mm, 14mm, 17mm.....brain, engine stand/crane, jack, jackstands.

I'll be there, at Folgers around 11:50...ive got a few things to do in the parts Dept...I hope.

DIS....hahaha...Dizzyless Ignition System.....DIS i mena by Do It sideways i think has connections...so he could get all that done. I know I could do all that for less than 1k...cuz I could do it myself, and I have connections too.

Jimmy Higgins in Salisbury is the best guy I know in NC. 1-704-647-9590 is the number IIRC. There's a suby get together this sat at Folger SUBARU in charlotte around noon time if anyone is interested.