1988subiman

Test

No help? Need to know asap

Well just put a 6inch lift on my subi and we'll gotta ditch the mechanical fan and wire up electric fans... I have read bumble beast thread but it's not making sence to me I have from factory fan "1 blue with red stripe" wire and a solid yellow wire what one is the switch and what one is the ground and do I put the ground to the body or fan.....now for the thermo switch does it matter what wire goes where on my new hyandai switch or no my old wires are yellow black and on the new thermo switch they both are black hmmmm any help will be awesome and thanks for this form will post pics once fully finished this is my last step

17* degrees I believe

It looks like a nice setup love it I wish I lived a little closet to you guys lol

The red subi

I want details of this subaru do you have a build thread?

Yup had the strut blocks in already and the 92 legacy steering shaft is to long I tried shorting it but still to long

Well just got my adf 1.5 sub frame drop in with no problem but when it got to the steering extension I have a 92 legacy steering but it's to long by the way this is for a 85 Subaru ea82 with manual steering any help would be appreciated thanks

Got it yay lol so this is what a Weber is supposed to feel like.it turned out to be the throttle return spring blocking it from opening all the way thanks loyale 2.7 turbo for the pics you had sent me earlier and thanks everyone else I love this forum

Okay well it's been around 4 months since I put my Weber on and I'm finally at the point of tuning it because it idles and runs great untell I try to get on it I have no power .so today I was looking at it and I notice my secondary does not open when my car is running unless I do it by hand then it works I thought maybe my throttle cable is loose but it's not so I had my father go in with the car off and push down the gas pedal and it opened the secondary barrel so I'm at a loss trying to Google it came up with nothing . So if any of you have an idea I'm all ears

. Did you drop the transmission and strut rods for the 1"1/2 Or just the engine crossmember

do you want to do mine next lol your doing a hella of a job keep it up

Here you go try using Shellac used this the other day and it works great for me... its post #8 http://www.ultimatesubaru.org/forum/topic/71510-ideas-on-swaping-a-weber-carb-on-ea82%C2%B4s/?hl=%2Bea82+%2Bweber+%2Bvacuum

im in Mcminnville ,OR im up for meeting