
MountainBiker
Members-
Posts
194 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Everything posted by MountainBiker
-
Nor Nev and Nor Cal meet 8/6
MountainBiker replied to subieman's topic in Meet n' Greet. Your USMB Welcome Center
Yeah, I know, pictures are long overdue! No D/R like ForesterRanger, and I don't plan to do that in the future. I like AWD, and I have the AndyJo transfer clutch pack override, but I did it more than a year before Andy did. The lift is from SubaXtreme, and is just blocks on top of the struts. I also have the SubaXtreme front offroad Bullbar/bumper that provides a much better approach angle. I just completed some custom sway bar quick disconnects, and a custom rear bumper for better departure angle is in process. Hopefully the bumper will be done within a couple weeks, then I'll post some pics. -
Nor Nev and Nor Cal meet 8/6
MountainBiker replied to subieman's topic in Meet n' Greet. Your USMB Welcome Center
Good point! Yes, even with the 2" lift, my Forester is quite comfy. And if it gets cold, I can always turn on the seat heaters! If we would meet up on Sunday, I'd probably head up on Saturday and camp out. Might even bring the mountain bike along and check out some new trails, although I've explored quite a few MTB trails around Tahoe, I'm sure I could find something new. -
Nor Nev and Nor Cal meet 8/6
MountainBiker replied to subieman's topic in Meet n' Greet. Your USMB Welcome Center
Cool! Sept 9-10 and 16-17 are wide open. -
Nor Nev and Nor Cal meet 8/6
MountainBiker replied to subieman's topic in Meet n' Greet. Your USMB Welcome Center
Thanks, I'll have to check it out sometime. Next time you head out, give me a little more notice so I can tag along.:cool: -
Nor Nev and Nor Cal meet 8/6
MountainBiker replied to subieman's topic in Meet n' Greet. Your USMB Welcome Center
Nice Pics! Where is that area with all the decomposed granite, that doesn't look familiar? -
Nor Nev and Nor Cal meet 8/6
MountainBiker replied to subieman's topic in Meet n' Greet. Your USMB Welcome Center
Would've been nice to get an earlier notification! Have fun. -
I need to get some pics of my lifted Forester.
-
You can get a little better price by getting in on the ToyotaNation.com group buy. You don't have to own a Toyota, and in fact, you don't even have to join the forum: http://toyotanation.com/forum/showpost.php?p=1346493&postcount=217 I've had the ScangaugeII for a couple months now, and it is a good product. I still haven't found a good place to mount it either!
-
I might be interested in tagging along! Sounds like you have a good trip planned out. I'm chomping at the bit to try out my recently installed lift and offroad front bumper! I just need to get my schedule figured out to see if I can take two weeks off, since I'd plan to visit some friends near Seattle after the show.
-
Yep, that is what I'd like to do in order to get a secure attachment. It'll take more than removing the cover, because to get access to the top with the tap, the diff needs to be dropped 6" or so. A few weeks ago I looked at the differntial mounts and it shouldn't be too hard to do. An alternative would be to drill a hole through the sheet metal from the rear luggage area, to allow direct access to the top of the diff. Should be able to get a hole plug that would fit to seal it back up. Toyota has a diff breather extension with a hose fitting that is at 90 degree angle that should work. It is toyota part number 90404-51026 for about $4.
-
I can barely see the top of it, and once you spot it, you can reach up there to feel it. But it seemed impossible to get a wrench in there to take it off. On the Forester, it is visible from behind, and it is slightly to the left of center. It is the only thing sticking up on the top of the diff, directly in front of the rear cover.
-
I figure that somebody here must have a rear differential sitting around on a workbench, in particular, one that will be similar to a Forester diff. If so, could you measure the thread size for the little breather that is mounted on top of the diff housing? The breather looks like a small thimble on top, with a hex base for using a wrench on it. I'm guessing it is a tapered pipe thread, but I need to know the thread size. Yes, I'm rigging a diff breather extension, and I have a line on a 90* angle fitting that I think might work. I'd like to just drop the diff once to install it, rather than twice (once to measure, and a 2nd time to install it).