Scott in Bellingham

I should be able to ship all these orders by end of next week , got hit with a bunch of them

remove it and add a block off plate

we heard it run AWESOME had a great crew thanks guys for all the help I appreciate it now I need to cut a hole in the hood, never had a car with a carb stickin through the hood befor cant wait this pic you can see the disty , thanks Brian

PM me your phone

correct

when that happens can you say EA82 axles

cut 6 - 2x2 square tubing 1-1/2 long , drill 3/8 holes in them and mount them on top of the struts, the axles can take it , and yes the wheel camber is effected but you wont notice it driving it SJR

Heres some progress stock with 3" lift heres the cam/head cap and the ford Escort disty heres the parts you will need this is the complete ignition setup Another angle this had been modified the hole it goes into mounted another shot in the car now for the intake, adapter set on stock intake were the coil pack mounts up, mark hole with a pen heres were the hole will be made Milling the hole all milled out with weber carb

Jeff anytime after 4

Tiz come on over SJR

OK decided to go with the white car on this, marron car sits, heres the car pulled the engine out Saturday as the timing belt had broke, the water pump had been leakin and the oil guage had been readin zero, got the EJ 2.2 installed with a adapter and redrilled flywheel, removed the intake and all the engine sensors and wiring harness, and installed the ford Escort disributor got some pictures will post later, this is going to go quick as Im taking the car wheelin at Walker Valley this coming Saturday, so next is to modify the intake to take the weber,this is going to be a busy week , some are coming by Tuesday evening to help even if Im up till 2:00 in the morning out in the shop Friday night this will be ready for Saturday, SJR

got the engine in all bolted up with a distributer

the timing belt EA82 gave in the white car so in goes the EJ tonight if anyone wants to help, Im at it already got the engine ready to go in now to pull the one and install the EJ , Im in the shop , Im in Bellingham Scott

I will bring snacks to share, what do you guys want? I would like someone to run my camera as I havent got much video latley, also I will bring my GMRS/FRS walkie talkies do any of you guys have them also if so bring them ,

Thats what I would buy

I'll be there in the white car

$450 with rims, I have over $700 into them

for Mud Swampers rule, I have a set of these toyota rims I would sell I have these I would sell with the pug rims for the right price these are hankooks dont remember the model but I would get them in a 27" over the swampers, the swampers are the best for mud but most of your driving ends up on the road, swampers seen to be a bit soft and will wear on the road

\\I have one, if you come by tonight we can install it , is Chris going to walker on this trip??

No havent touched it , either that or the white car, SJR

redrilled flywheel

We will be at Sand lake around end of June love to see ya there

I could cast a alluminum one if you sent me a pattern, $20

on the 14th of this month this offer ends, If you want one for $90 I need to recieve payment by that date, after that date they will be $165 at my store www.sjrlift.com