MysteriousXTC

Nothing beyond a simple relay setup...

Found a few on the car... Just realized this last one was not meant to be in the group but I'll leave it for any interested parties...

Wouldn't have a problem doing so, I just dont have a old school subaru to fab one up with... I should have made a jig...

Can't help you there... OPs car was different than the one I owned...

Old thread is old... I don't get on much anymore but I have been poking around and came across this thread... That bumper was one I built many a years ago, built 3 total...

Big ups on the fabrication, I can really respect that... I don't know if its the steel or what but something just doesn't flow right, but to each his own... The lower lights are just waiting to be busted...

Looks like the wagon is getting sold this week, we shall see though... Maybe I should get my STI onto a beach...

Awesomeness, welcome to the subaru family... Looks like a nice garage you got, I'm gonna have to come over and help wrench on it ... Seriously though stay in touch and let me know if you need any help with anything...

this is the design I had been working on, kinda got side tracked and might be selling my wagon so I don' know if I will ever finish them...

I see, thanks for the info!

Still haven't been back to the house to check on things... Anyway, with the dizzy rotor or timing belt, even if there was a problem with one of those items wouldn't there still be spark coming from the coil? Since I have nothing coming from the coil I'm inclined to believe the timing belt is fine and so is the dizzy, thus making me believe something pre-coil is wrong, ie the amp

I'll take a look when i get back to the house, thanks for the input

Thats pretty nice looking bumper...

Just had a great snow last night and on the way back to the house from driving around this morning my wagon cut off and wouldn't start back... After I got it back to the house, tried to start diagnoising it... Appears there is no spark/power from the coil and I have replaced the coil with 2 known good ones and still nothing, thus the problem appears to be before the coil... After a little bit of researching I've decided I will try and replace the amplifier, little electronic piece that is attached to the bracket that holds the coil... Just want to make sure there isn't anything that I might be missing, all the fuses under the dash are good and the fusible links seem fine and well connected... Like I said just want to make sure there isn't something else I am over looking or something that I might also want to grab when the local junkyards actually open back up after some of the snow clears.. -caleb

welcome, nice to see more NC members

Buddy of mined used the copper colored BB's in his 39.5s mounted on beadlocks and the difference was insane... they worked very nicely not to mention how funny it is when you come to a stop and you hear them clanging around on the rim lol...

can through a hand full of BBs into the tire before you mount it, worked pretty well at balancing my buddies 40's on bead locks... not to mention its pretty funny when you come to a stop...

its obvious the camber is out in the pictures but it doesn't look extremely bad in my opinion... the angle on the axles looks to be much more than mine, but i do only have 1.5" blocks.... maybe do some 1.5 inch blocks and increase the angle to around 20 and see if that helps...

wish I could come take a look, alas all you guys are too far away...

Again are the springs stock? Do you have pictures of the tire camber stock versus tire camber now?

I don't see how lowering the cross member allows for bigger tires? I think he likes having the extra clearance under the cross member hence his dilemma...

Post some pics of how off your camber is and please post some pics of your lift and the blocks... I think I was able to go beyond 15 degrees something like 20 or so with just 1.5 inches, though I honestly don't recall exactly... But please post some pics... Oh and are the front springs stock?

How did you make your homemade lift? Did mine 1.5 inches and its no worse than before... If you lift via the top of the strut then the key is to build the lift so that the top of the strut is angled further inward than its stock location...

Did my passanger front a few weeks ago, pretty simple, took maybe an hour if that... Gonna have to do my drivers side here soon when I get the cash, maybe if there isn't already a write up ill do one for it...