Shadyirishmen

Hey I did that too, but unfortunately when my tire caught the ol battle roo rolled on its side.

Current list Skid Plates: 2 maybe Kingbobdole: Maybe once pictures are up Cmiller: Maybe once pictures are up Bumpers: 2 maybe Justified: Once pictures are up Cmiller: Maybe once pictures are up Lift Kits: 1 for sure Harvester: EA 81 lift kit

we make strut extensions for both the EA 82 and EJ, also rear strut extensions are made for the ej, The ea's gets a rear strut extension but it is different than the EJ's. From the sounds of it with a little mixing and matching we can make a lift for the Xt6. I need to get those pictures up pronto.

The skid plate should fit the byb lift. The price all depends who jumps on the group buy (you could pay as little as $600 or less for wheels and a lift although thats not including shipping). the only way to get it going is to start posting messages in it. http://www.ultimatesubaru.org/forum/showthread.php?t=46790 Good luck, Thanks JM

ATTENTION: ALL PRICES HAVE BEEN LOWERED TO AN ALL TIME LOW. This group buy includes everything we make and distribute Lift Kits, Wheels, Skid Plates, New Bumpers (not pictured yet), EA to EJ adapters most products are in stock and will be marked as so. Please Read Everything: Whoever is interested in buying a brand new manufacture Subaru lift kit, Set of 15x6 wheels, Bumpers (front or rear), and EA EJ adapters. for a discounted price manufactured by Allied Armament (except for the EA EJ adapters) this is the OFFICIAL Christmas GROUP BUY. Scroll down to see each group buy Lift Kits: The lift kits are made of steel and the majority of parts are laser cut quarter inch thick. Our tranny lift components are unitized (instead of individual tubes that are known to bend captive nuts), they are parkerized and painted with Hammerite hammered paint and are guaranteed free of manufacturing defects (cracking, bending, etc.), and come with a 5 yr warranty. (there is now a steering core exchange included you can save $10 if you exchange your old steering shaft) This group buy will be open till DECEMBER 16th, and the pricing goes as follows. (All purchases count towards the group buy discounted price for each product, I.E. 5 Lift kits sell than puts the lift kit Category in the second tier of pricing. Two EJ adapters sell than that puts that product in the next tier pricing). ALL LIFTS ARE AVAILABLE IN 4” versions only Pictures http://alliedarmament.homestead.com/LiftKit.html EA 81 Standard Lift: Lowers front and rear sub frame equally. No axle strain includes rear brake lines (had to raise price $10 to accomodate extra costs). (bolt on kit) (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 people on group buy $360 6-10 people on group buy $345 11-15 people on group buy $ 330 16-20 people on group buy $ 320 EA 82 Moderate clearance lift: Lift is built using standard front lift that lowers the whole front sub assembly and keeps stock axle geometry in the front. The rear of the lift is lifted via the top of the strut 3” inches (same rear lift on 4” and 3” lifts) and uses a 1” mustache bar lowering block. LIFT WILL KEEP YOUR TIRES CLOSER TO THE CENTER OF YOUR WHEEL WELLS IT IS NOT LIKE OUR HIGH CLEARANCE LIFT. This lift adds some strain to the rear axles but has proven dependable on the rear axles for over 10 thousand miles, unlike competitors lifts this lift will keep your rear end tucked up tightly so that you have more clearance and protection under your rear sub assembly. This lift will provide dependable drivability and superior offroad performance. This is our most affordable lift kit and comes highly recommended by our CEO. (Bolt on kit) (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 $ 345 6-10 $ 335 11-15 $315 16-20 $305 High clearance lift: (4” lift only) Lift is built using standard front lift that lowers the whole front sub assembly and keeps stock axle geometry in the front. The rear of the lift is lifted via the top of the strut 4” inches and uses a 1” mustache bar lowering block. This lift adds excessive strain to the rear axles but has proven dependable, unlike competitors lifts this lift will keep your rear end tucked up tightly so that you have more clearance and protection under your rear sub assembly. This lift is for the purest and provides superior offroad performance. (Numbchux has this lift and has written about it). (Botl on Kit). (20 in stock) (dont forget send your old steering shaft in and save $10) 1-5 $ 345 6-10 $ 335 11-15 $325 16-20 $315 EJ EJ series lift: This is the newest addition to the allied Armament family. We have fitted it to Outback Wagons and Legacy sedans. It comes as 2.5” lift for the outback and 4” lift for the Legacy. It retains stock geometry in the front and adds minimal strain in the rear (almost none). It is based on lowering front and rear struts via strut extensions and lowering blocks for front and rear sub assemblies. We are unsure if this lift will fit on the Imprezza model and newer model outbacks (2000 and newer). If people are interested they can bring there vehicle to our shop and have one fitted to these two types of vehicles and they can join in on the group buy. (We are located in Scappoose OR.) (bolt on) contact for pictures (1 in stock) (dont forget send your old steering shaft in and save $10) 1 $485 2 $455 second purchase will have to wait for manufacturing to build more 3 $445 ditto Shipping is not included in this price. Shipping is $20 for the lift kits Allied Armament 15x6 4 lug wheels for EA series vehicles: (9 sets of four in stock extras are available at individual discount price) 8 sets black 1 set white Pictures: http://alliedarmament.homestead.com/Wheels.html 1-3 sets: $290 4-6 sets: $275 7-9 sets: $265 10 and above: $260 tenth buyer and above have to wait a month for more to be produced. EA to EJ Adapters: (4 in stock) Pictures: http://alliedarmament.homestead.com/EAEJ.html 1 set: $175 2 sets: 170 3 sets: 165 4 sets and above: 160 Skid Plates for lifted Roos: We found that this version is perfectly fine we can place a jack under it and lift the car. The only difference between the picture and the new one is. There is more area cut out for the sending unit, and there is buldge plate welded on Photos: http://alliedarmament.homestead.com/SkidPlate.html Prices: Stainless Steel/ and steel 1-5: $185 / $ 150 6-10: $175 / $140 11-15: $165/ $135 16-20: NA/ $120 Bumpers tube bumpers: (dual tube bumpers)(direct bolt on) EA 82 and EA81 if you buy a set there will be an additional $25 discount. http://www.ultimatesubaru.org/photos/showphoto.php?photo=9240&size=big&sort=1&cat=500 Front Bumper: 1-3: 249.99 4-6: $229.99 7-9: $215.99 9-12: $199.99 Rear Bumper: 1-3: 249.99 4-6: $229.99 7-9: $215.99 9-12: $199.99 Buy a set save an additional $25 Photos and pricing available 11/26/05 (fifty to be in stock) In order to buy please put a reply thread on this board with your email or screen name if interested or email me directly at malarkey2@aol.com. After we have contacted I will put your screen name on a list in this message. A $20 non refundable deposit must be made in order to be put on the list. Payment in full will need to be received before December 16th to be eligible. After December 16th the orders will be processed and and will take up to 10 business days for be processed and shipped. Any orders that are not filled and shipped by December 27th will be given a $25 dollar discount after January 7th if you order has not been shipped you will receive a 50% discount on the purchase price of your product unless otherwise specified wheels for one and lifts over 20 quantities of which will have to wait regardless. We guarantee quick delivery of our product, because we manufacture most in our shop there will most likely be no delays. Shipping is an added charge and shipments will be shipped from 55948 Columbia River HWY Scappoose OR. 97056 Please send all payments to CREDIT CARD: (503) 543-5154 Allied Armament P.O. Box 1186 Scappoose OR. 97056 Or Via Paypal by using our email address: Malarkey2@aol.com Thank You, James Malarkey CEO Allied Armament www.alliedarmament.com

Fine fine then I'll go ahead and start the group buy.

If anyone has a steering shaft to sell will take all we can get as long as it meets the criteria at the first post. Thanks JM

Yea, I can take some this weekend and load them up and put them into this thread.

Telescopic drive shafts! We have looked into building them. To have four built with 65 degree angle shafts (yes they are available). Costs about $1000-$1200, we can have them made and sell them to you for $1300!

Dude that brat looks cherry.

Just buy a safari snorkel for a 1990-1994 Jeep cherokee. It will come with most of the hardware but not everything. Well not everything for a subaru that is. You will have to make a custom air box and you may have to trim part of the snorkel off. The way we made the airbox was used 2x4 steel box tube. We placed the gasket from the carb on it and traced it out with a milling machine, welded both sides up so it was enclosed, drilled a perfect hole in it the same diameter as the tube that mounts into it and welded the tubing on the fits the air line. Okay I hope that made since. We also had to retro fit the plastic snorkel fit the fender of the vehicle so that it wouldn't go through the meat of the unibody support frame. the snorkel for the most part was a pefect fit, it definitly matched the fender line so it gives it the factory look. Although the only thing I was pissed about is when my associate placed it on the fender he put it away from the window piller so it sits about 2 inches forward of it. I hope some of this information made since?:cool:

Or with the right tools you can install!!!

If you wait about a week we are running a group buy, you can get a lift for probably the low $300 range from us. If you build your own their is some guess work involved like getting the camber right on the front strut extensions, knowing how far to lower the tranny crossmembers (2.5 to 3" inches max) so you can still use your dual range without adding extra fabrication to the linkage. Also the bolts are a bit hard to find and spendy if you go grade 8 we spend $60 a set for each lift and we buy bulk. Some people have done very applaudable jobs on some huge custom lifts. Jon mudrat for one is notorious for building 8-10 inch lifted rigs (although I don't know if they are streetable), so thats always an option. I would do some research before I made a purchase to see what fits your particular use, because all lifts are not created equal.

Well you don't need a turbo, its only if you buy a turbo car. I don't think there are to many people running turbos in lifted subaru's most people are putting EJ engines in them.

one word DISTRIBUTOR. Also inventory carrier. I've been trying to pen up all sorts of deals so we can distribute the majority of aftermarket subaru accessories especially for offroad. Makes surfing the web a lot easier especially if the prices are all the same . Thanks to the Hatchmonster he was one of the nice vendors that agreed.

We got overloaded with projects so we probably will not start the group buy until the 15th, but when I do I am going to post pictures and prices of everything. We just had a ten gun deal go through at weaponeer.net so that kind of postponed everything (just for reference).

Donation Made. Yay now I feel better about myself.

Only time you'll have to change anything (other than lifting your car), is when you put large tires on, then you have to start cutting.

Its a tragedy what Martin Bryant did in Port Arthur Australia, it forever changed gun laws down under. All of the firearms on my website can be bought and sold by civilians, it probably seems crazy where your from but here its the norm. I would like to donate some money to the USMB can some post the link to the donate section? Chris I am game with going for wheeling, I don't have my car down here this weekend but I will have it next weekend. Lets do it.

I am building a customer pictures page on our website of all of the allied armament lifted vehicles. If anyone has pictures they want me to post on the page please send them to me. They will be forever immortalized on our website... Thank You, James Malarkey

well the one you have pictured and photoshoped that would be fairly easy to build is that what you'd like? We could build it.

I did put a picture up on this site but it was removed. Go to this URL and look at the bumper we just built I think it will beat your expectations. http://www.ultimatesubaru.org/forum/showthread.php?p=365174#post365174 P.S. Chuxs love the photoshop editing (A+++)

http://www.ultimatesubaru.org/forum/showthread.php?t=45991 go here and take a look and see what you think.

I have about 25 sets in stock for the 4" lifted rear.

Since were on topic can I use your picture on my website if I block out the license plate? Once again I am truly sorry. I just wasn't thinking. I owe you one. JM