Turbone

Go back several post and look at the design I started. Its just a starting point/mock up. Any help will be appreciated and considered.

Thats if I buy the hats from Subaru. Which I'm not doing, I'm getting them from the place that is doing the embroidery. If the product bearing the TM is not being used to promote another business and the sale of its products, I dont think there is going to be a problem with using the logo. If you dont feel right about it, I wont force you to purchase a hat:cool: If anyone cares to read thru all the legalise of TM, Copyrights and Patents, heres the link: http://www.uspto.gov/web/offices/tac/doc/basic/index.html I have never seen a registered mark on any of the Subaru logo's, only on the name itself. And the logo I'm using is the Old School one.

Yes its been done before. Try doing a search under the user name JWX.

Well, this is Zap after cleaning out your engine compartment. That sucker was packed full of mud and debris:lol:

It depends. If the weatherstripping is in good shape and the rockerpanels arent bashed in. I wouldnt say they are totally leak proof, they will leak after a period of time, maybe 15min more or less. Heres a old pic of Austin in his EA81 Water Wagon:D I think this is where he decided he needed a snorkel:brow:

I think the Thruston Co ORV park is open again. Its just east of Oly.

So all the Banners were returned from last years show?

Theres nothing different about the logo on those signs, thats factory accurate. I also have a shirt from the old PNW Subaru Club that has the logo on it and the SUBARU name on it also. I dont think these were purchased from Subaru.

I have 30x10.50 Super Swampers on my Hatch, no rubbing issues at all. But I do have 8in of lift tho:D

Ok, lack of sleep has made me err. The DGEC is further up the page but is a 34. So maybe what you have is a Solex:confused: Which if it is, I would toss out IMHO. I had one one my Opel Wagon, it was a pyle. I replaced it with a Weber.

Actually, I dont think we have to worry about copyright infringement. I've been checking out a few things. I've noticed alot of shirts and other ballcaps with company logos. I think the trick is to not make a profit off the sales. We'll see, I'm still doing research.

And I thankyou very much. Thats your muddy hood too:-p I still remember my youngest laughing when my leg got all wet. Sealed that shifter hole good after that.

We are the professionals. There are not to many aftermarket wheels (Almost none) for Subaru's until you get into the 5 lug variety. It took alot of searching to find a car that matches our bolt pattern. We have been using Pug wheels, steel and alloy for almost 10yrs now and have had no problems on or offroad. Your link to that web site doesnt even carry wheels for Subaru.

I think they are talking about a newer digital projector:confused:

Ok, give me some help here. Anymore ideas?

If you look at the pic, theres 2 barrels on the carb. The application for this carb is MIDGET MKIV 1493cc 1975-79.

Heres my first serious water fording. Now thats a bow wave:headbang:

You sure? :Look down at the bottom of the page.

I came up with this. http://www.webercarbsdirect.com/mg

14" Pugs with whatever tire choice suits you. Tires depend on what your going to be doing with the Brat.

Well, now I'm going to have to come. Just so I can take a true pic of that hole when you go thru it:brow:

The radiator fans need to be on a switch. Once you get deep and you've been running hard, you dont want the fans acting like props. Causes all kinds of problems., like puncturing your rad:-\

No, thats the only one I have. Got it off the board a few years back, dont remember the thread about it.

Did it look like this?

Yeah, I remember that. You and someone else made many trips up to the stage to collect goodies. I need to start a kitty going for raffle tickets this year:rolleyes: