May 26, 201510 yr And that is the last photograph that photographer ever photographed. Why? ... ... He was run over?
May 28, 201510 yr Never heard of a telephoto lens, I have seen people cop rocks from rear wheel drive and All wheel drive rally cars sometimes breaking a lens and other times more painful like one who copped a rock in the Family Jewels (he went down like he was shot moaning in agony).
June 13, 201510 yr My kind of Subaru Brat: It has the same "Radioactive Yellow" Colour as my "BumbleBeast" and also a Turbo EA82 / Dashboard swap ... this is a 1991
June 14, 201510 yr Some hard.work ahead for the poor old ea71 engine in this: https://goo.gl/photos/qPD1iP3aX2cjc75u5 Over 300 km trip ahead closer to my home so I can finally start doing something to this car.
June 16, 201510 yr Drive safely! Try not to push the accelerator pedal *through* the floor! Trip is done already. It came nicely all the way even it had almost 450kg weight in the trailer and some 150kg more in the trunk. Had to use fourth gear pretty much but otherwise no problems even in the steep hills. So safe and sound where it should be
June 23, 201510 yr I thought the brat was looking good out in the field today. Edited June 23, 201510 yr by comatosellama
July 4, 201510 yr Yes or No for this hood scoop (obviously it will be functional too) ? https://www.dropbox.com/s/jzp8k5h6oewsxua/2015-07-04%2014.33.56.jpg?dl=0 https://www.dropbox.com/s/7iesvnw351awwi9/2015-07-04%2014.33.45.jpg?dl=0 https://www.dropbox.com/s/40jlboapxnl1a9f/2015-07-04%2014.34.06.jpg?dl=0
July 4, 201510 yr Yes or No for this hood scoop ... Yes! ... it looks nice. I made the one on my "BumbleBeast" with sheetmetal. Kind Regards.
July 4, 201510 yr Yes! ... it looks nice. I made the one on my "BumbleBeast" with sheetmetal. Kind Regards. Thanks for the opinion ! On it goes then. This one is made out of ABS and I payed under 15€ delivered. It seems to be sturdy enough to handle the stress it gets in there. I already modded it to have more opening in front so it can flow more air trough it. I will probably attach it with rivets (maybe rivet nuts) and with the supplied sticky tape in there already. I'll cut the hood under it to direct air to my intercooler before putting it on. It looked like this when it arrived: http://i.ebayimg.com/00/s/ODAwWDgwMA==/z/3bwAAOSwnDZT~v1D/$_57.JPG
July 4, 201510 yr I call the one I made, the "interFooler" Please see ~► Here, for further details. ... This one is made out of ABS ... attach it with rivets (maybe rivet nuts) and with the supplied sticky tape in there already ... Rivets / Blind Rivets could break the ABS Plastic. I kindly suggest you to use screws with washers, instead. With nuts in the underside. Kind Regards.
July 4, 201510 yr I call the one I made, the "interFooler" Please see ~► Here, for further details. Rivets / Blind Rivets could break the ABS Plastic. I kindly suggest you to use screws with washers, instead. With nuts in the underside. Kind Regards. Yes I was thinking of using rivet nut inserts that has thread in them on the bonnet and screws with washers to fix the scoop in its place. This way the scoop is easily removable and the bonnet has strong mounting points in it. This way there is no need to fight with bolts on downside of the hood. But I have a lot of time to think how I will fit it really.
July 5, 201510 yr Yes or No for this hood scoop (obviously it will be functional too) ? Absolutely not.
July 5, 201510 yr Absolutely not. Well why not then ? I've got a replacement hood for this so it won't ruin it forever.
July 6, 201510 yr Well why not then ? I've got a replacement hood for this so it won't ruin it forever. It is ugly and you lose sleeper look. Put fimic or air to water intercooler.
July 6, 201510 yr It is ugly and you lose sleeper look. Put fimic or air to water intercooler. Too expensive at the moment. Already have TMIC from -00 GT impreza mounted in there. Also it will probably get FMIC later on and with that original hood back.
July 23, 201510 yr I found something pretty horrible from the internet thingy today. (Scroll to bottom of the page): http://www.mstuning-sound.wz.cz/cars.html
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now