Breeke

I will have a chain saw with me, so don't worry around a saw if you don't already have one.

RedCap, I had this same issue too...at first I had my blocks in wrong...I put them correct and now I have a slight camber...that's just how it's gonna roll...(PS my stut tops aren't flat, so thats why I have a slight camber now, new sturts to come soon) Just do as 3 eyed said...check the stuts and see if they are angled anyway other that directly inboard.

which way is your camber...... mine is also a little cambered but i think i have solved the issue, its a one of a kind problem lol

Keep us posted....

Ahhhhh I see....you beat me to it......

right, I'm just letting him know of the two...I doubt that he has either though

God I love the snow!!! Looked like a good time...You should roll with another rig, it sucks being stuck with no one to pull you out :eek: Looks like you had a blast, it's official, I'm jealous. -Caleb

Cussed at it last night about the strut hats being angled. not flat. and managed to work out some of my camber issue

VLSD engages at speed..not like LSD that will engage while crawling...hence why people use LSD for wheeling cause you going slow...or supposed to..

LOL nice...*elbow elbow get it get it* Welcome, Chad, looking forward to meeting you as well as the run on the 6th -Caleb

:mad: :grin: I see how it is, your house comes before the car when there is snow. BS!!!

:mad:Yeah, that computer pissed me off so i just went back out to the shop. I was wondering if the stuts were bent myself..but it seems just the top is at an angle and the two sides are identical. I'm gonna look into it more. If anyone sees this i wouldn't mind a set of struts that i could swap in there. I'm not done getting this hammered out...next up is try different struts....maybe i should visit the JY -Caleb

OK, So as some of you know i had trouble with my camber with the new lift. Tonight i tore it back apart and looked everything over. The lift was in CORRECTLY and I still had camber issues. Bill and I discussed it on the phone and we were both at a loss of what the problem is. :-\ I deceided to take pics and email them to bill so he could have a look. Lucky me, I can't figure out my dads camera to computer connection, so the pics wouldn't email. I went back out to the shop for another look around....I tried the Passenger side block in the drivers side...No Dice! So this tells me only one thing.......the lift is labled correctly and built correctly...so the problem must be my issue on the car or somthings.....I have a good look at the strut hats. WTF!!! my strut hats are angled!!!!! I sping them over and over and confirm what I did not know. Are they camber correcting hats or what??? I thought the hats were on a flat plan....not these!!! So I find the lowest part of the hat a properly position the block on them Passenger on Passenger and arrow forward. As well as the other side....I bolt everything back up and pray.. Let the car down and low and behold the camber is better...I drive down the driveway and back to the shop...it's settled some... So as of now I have OK camber and hats that are not on a flat plane. I run in here type this messege and head home to hit the sack before i gotta work in a few hours. Pics will follow soon....tomorrow or the next I promise, I gotta get this camera issue lined out first. -Caleb

The sticker should say in big letters "LSD" on it If it don't say it then its prob not. but don't take me for all knowing, so see what others have to say too. -Caleb

:banana: Good talking to you today man. -Caleb

Fighting.. thats how mine went too

Very true

never seen or used one (obviously) But RAD!!!! I'm gonna have to upgrade...i can think of a million reasons why and 0 reason not to... that thing looks handy dandy -Caleb

I personally think you'll be ok.... looks to me like the axle was not on all the way and it slipped or something. I would toss the axle back on and make sure it is "home", install proper pin and engage driving!. ..but disregard me, i'm no mechanic. -Caleb I'm interested to what you find out for sure

No doubt. Forks is fairly not flat but you have a good idea going

That is odd...but kick @ss

Bungies!!!!!!!!!!!!!!!! you can fit anything with rubber!!!! PS what twitch said.....

Go with everyone to the X-mas tree run. that will be a trip of off-roadingness

working 12s this weekend... i'm gonna try to tear into the car agian tonight. Maybe I'll think to grab pics.