Scott in Bellingham Posted October 12, 2006 Share Posted October 12, 2006 picked up 87 2WD Justy it has 12" wheels wondering if theres 13" rims avalible for this car? Quote Link to comment Share on other sites More sharing options...
hatchsub Posted October 12, 2006 Share Posted October 12, 2006 All i know is the bolt pattern on Justys is diff than that of regular 80's subarus with 13 inch wheels and 4 bolts. Not saying there arnt 13 inch wheels that will fit it but not subaru 13 inchers. Quote Link to comment Share on other sites More sharing options...
burtonsnowman Posted October 12, 2006 Share Posted October 12, 2006 There are 13" wheels available. Some Justys came with them. I owned one. (Don't know where to get them, though...) Quote Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted October 12, 2006 Share Posted October 12, 2006 About a month ago I saw a justy with some 13" wheels at the junkyard.They were alloys and looked to be aftermarket of some kind.Wish I would've grabbed them. Quote Link to comment Share on other sites More sharing options...
Numbchux Posted October 12, 2006 Share Posted October 12, 2006 Justy's have a 4x100mm bolt pattern, I think it's the same as the old civics. I'm pretty sure there are a bunch of options. Quote Link to comment Share on other sites More sharing options...
970subaru Posted October 12, 2006 Share Posted October 12, 2006 also 4 lug watercooled VW's, older 4 lug mazdas such as miatas and 323's, 4 lug bmw's(hot alloy 13"ers off a e21 320i) the vw's are hub centric, not sure about any others or any offsets. there are several cool looking 13"ers from vw rabbits. Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 12, 2006 Author Share Posted October 12, 2006 sounds like it should be easy to find a set, I have a set of 13" snow tires I wanted to run this winter thanks everyone, Quote Link to comment Share on other sites More sharing options...
zyewdall Posted October 12, 2006 Share Posted October 12, 2006 Justy's have a 4x100mm bolt pattern, I think it's the same as the old civics. I'm pretty sure there are a bunch of options. I think the old hondas, vw, toyotas, and fiats (and possibly others) all have that same small four bolt pattern, though not sure if the offset is the same on all of them. Quote Link to comment Share on other sites More sharing options...
Lukas Posted October 12, 2006 Share Posted October 12, 2006 There was a bodykit available in austria, and it came with 13" rims. There were even 14" rims available, but only on special order for the 1,2 Super Justy. The 1.0 Junior Justy had 12" and 13" as an option. Lukas Quote Link to comment Share on other sites More sharing options...
Rollie715 Posted October 12, 2006 Share Posted October 12, 2006 Hey Scott, I bet we have some old Rabbit wheels around in the 4x100 size. Rollie Quote Link to comment Share on other sites More sharing options...
gpilot Posted October 14, 2006 Share Posted October 14, 2006 Be careful if you have an 87 or 88 Justy. My wife got one, and I put 13 inch Honda wheels on it. (4 x 100mm) But the rear wheel well area on the 87 and 88 is smaller than the 89+ years. I had to remove about 1/2 to 1 inch of body material from the front outer portion of the lowermost part of the well area to avoid tire rubbing when the suspension was compressed (bumps). Also had to cut some of the plastic from where the rear bumper fits on the aft outer part of the well. As this is strictly a driver I wasn't too concerned with cosmetics. The front tires posed no problems. I could have repaired the areas I did surgery on to look stock however wasn't worth the effort. The 13 inch wheels/tires perform much bettter in snow than the 12 inch. Of course a lower profile tire might have helped but my main reason for doing this was to get a longer circumference overall for snow. Good Luck! Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 15, 2006 Author Share Posted October 15, 2006 I tried a honda and a toyota rim both have the right pattern but the center hole is to small hits on the front but not the back hub Quote Link to comment Share on other sites More sharing options...
malamute Posted October 19, 2006 Share Posted October 19, 2006 I tried a honda and a toyota rim both have the right pattern but the center hole is to small hits on the front but not the back hub I'll go out and measure one of my steelies for center hole dimensions and back spacing. For winter duty I run Nokian NSW's in front and old Hakkapelettia NC 10's in the rear. I simply don't get stuck with these tires. Matthew Quote Link to comment Share on other sites More sharing options...
Esteban32696 Posted October 29, 2006 Share Posted October 29, 2006 Look thru this site for 13" info ;;; http://www.subarujusty.proboards20.com/index.cgi?board=wheelsandtires Quote Link to comment Share on other sites More sharing options...
zukiru Posted October 30, 2006 Share Posted October 30, 2006 I tried a honda and a toyota rim both have the right pattern but the center hole is to small hits on the front but not the back hub how much too small?? if it's just a little then it should be okay to enlarge it. also try a saturn/GM 4X100 wheel. it has a larger hub center. Quote Link to comment Share on other sites More sharing options...
Phizinza Posted October 30, 2006 Share Posted October 30, 2006 I think the old hondas, vw, toyotas, and fiats (and possibly others) all have that same small four bolt pattern, though not sure if the offset is the same on all of them. Fiat's use 4x98, same as Alfa's.. And won't fit 4x100. Pretty much every old and new small jap car with 4 studs uses 4x100. Very popular size. But don't just go on that, try and measure it. Quote Link to comment Share on other sites More sharing options...
Numbchux Posted October 30, 2006 Share Posted October 30, 2006 Fiat's use 4x98, same as Alfa's.. And won't fit 4x100 why wouldn't that work? 6-lugs are technically 6x 138.5. and it's barely even noticable. Quote Link to comment Share on other sites More sharing options...
Quidam Posted November 2, 2006 Share Posted November 2, 2006 I tried a honda and a toyota rim both have the right pattern but the center hole is to small hits on the front but not the back hub Hey Scott, This copied and pasted: "The justy takes PCD 4x100, Offset 35-38, Centre bore 59.0." "The wheels from any of the following cars will fit a pre '94 Justy. I had 185/60R13s on my '90 2WD." "ACURA ·Integra 86-ON DODGE/CHRYSLER ·Neon 4 Lug 94-ON ·Eagle Summit 86-ON DAEWOO ·Lanos 98-ON ·Nubira 00-ON FORD/MERCURY ·Escort 91-ON ·Tracer 91-ON GEO ·Prizm 89-ON ·Storm 90-94 HONDA ·CRX All ·Del Sol 93-ON ·Civic 80-ON ·Prelude 82-91 ·Accord 80-89 ISUZU ·Stylus 91-92 ·Impulse 91-92 KIA ·Sephia 94-ON MAZDA ·Miata 90-ON ·MX3,GS 92-ON ·Protege 90-ON MITSUBISHI ·Mirage 93-ON ·Precise 87-94 NISSAN ·Sentra 86-ON ·Pulsar 87-90 SATURN ·SC-Coupe 91-ON ·SW-Wagon 93-ON ·SL-4 Door 91-ON SUBARU ·Justy 90-94 SUZUKI ·Esteem 95-ON TOYOTA ·Corolla 89-ON ·Tercel 89-ON ·Paseo 92-ON ·MR2 89-90 VOLKSWAGON ·Golf II & III 85-ON ·4 Lug Jetta 81-ON ·Cabriolet 92-ON ·Rabbit 76-91 ·Fox 87-93 ·Corrado G60 89-92 ·Scirrocco 79-89" How's it going with the search for wheels for your Justy? For next summer, I'm going with a 195 45 15 tire. The car has 165 65 13 on it now. After looking over the wheels available, I'll probably go aftermarket with a 40 mm offset. As this car is so light to begin with, I want the lightest wheel I can get, for the money I'm going to spend. 10 to 12 pound each range. Bigger tires and wheels, more weight, more diameter, will kill off some performance of your Justy. Throttle response takes a hit and the car won't handle as well over all. One carbureted Justy I put 70,000 miles on. The stock size is 145 12", when I put 155 12"s on it, I could tell they weren't as good as stock, overall. Tal Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted November 2, 2006 Author Share Posted November 2, 2006 never thought of a neon I happen to have a old set of those Quote Link to comment Share on other sites More sharing options...
Quidam Posted November 2, 2006 Share Posted November 2, 2006 never thought of a neon I happen to have a old set of those Hey Scott, Here's some of the choices we have in diameter: 145/80-12>21.13 Stock on any carb Justy, probably. 165/65-13>21.44 Stock on any FI Justy, probably. Not much selection and the Bridgestones in this size are expensive. 155/80-12>21.76 I had a set of these on a carb Justy and hated them. 195/45-15>21.90 My choice for the pimped Justy. Lots of choices here in price. 185/55-14>22.01 Not sure what's available with these. 165/70-13>22.09 The tire I see most on FI Justys. Readily available and cheap, compared to the 165/65-13. Fits the wheelwell with no mods. 175/70-13>22.64 These are too big and will require modifications to fit them to the wheelwell. HTH Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.